I wouldn't be surprised if Pixar created a Blender plugin for it themselves. They recently released the Renderman for Blender plugin, so it's not out of the realm of possibility.

Meh. Everyone knows every other MS release is trash.

I'm gong to hold out for for Minecraft 10 Enterprise Server Upgrade 365 x64 for Workgroups

(and maybe SP2 just to be safe)

Because I seriously can't remember the last tv show I sat down to watch (that wasn't on Netflix).

Google Maps show Rightscorp's address as Santa Monica Airport: https://ancillary-proxy.atarimworker.io?url=https%3A%2F%2Fgoo.gl%2Fmaps%2FIFgj5

At first I thought this was a mistake. However, upon further consideration, this may also be an obvious choice location for any fly-by-night operation.

Whoa there buddy. I'm not against "super"conductors. I just think we should suspend all research, development or mention of them until they've been proven completely and absolutely safe. We wouldn't want them accidentally polluting our good, clean, natural, organic conductors, now would we? Think of the children!

Sherlock Holmes: Bluebell, John! I've got Bluebell, the case of the vanishing glow-in-the-dark rabbit. NATO's in an uproar.

(For the uninformed: http://www.imdb.com/title/tt1942613/quotes?ref_=tttrv_sa_3)

And here I thought the cardinal directions for that continent were North, South, More South, and Suddenly North Again.

You're right, there's ways of cheating around it after it's been filmed. You have the luxury of simply needing it to be accurate rather than just look good to someone else though ;)

Theoretically 24fps with a 180 shutter angle and 48 with a full 360 shutter angle would have the same amount of motion blur, as they'd both expose the individual frames at 1/48 second. I'm not sure how'd that'd look, or if its even possible to do with a camera. Might be fun to try.

"Practical" in film terms has a very precise meaning which I kinda glossed over. It means something that can be done in camera. What you're referring to is what would be referred to in the past as a "special" effect. Today I mostly hear it referred to as a post effect, digital effect, or more commonly, expensive. :)

but yes it is possible

Ehh... its more like (1/framerate) / (shutter angle/360) = shutter speed. So at 24fps at 180 degree shutter angle you'd have a shutter speed of 1/48 of a second. Compare that to 48fps, where you have 1/96 of a second exposure. You now have twice the FPS with half the motion blur. You wouldn't think it would look much different but it does. That's the difference between "dreamy" 24fps and "more realistic" 48fps.

Though since you brought it up, you could theoretically shoot at 48fps with a full 360 shutter angle and would have the same motion blur as 24fps at 180. I have no idea of how it would look, or if thats even possible with any camera, but it'd be interesting to try.

Not at all irrelevant. I can't expose frames for a full second if I expect to be filming at 24 frames per second. In fact, to actually record 24fps, I need to expose and record 24 frames per second. I can of course, lower the frame rate in post through a variety of methods, and there are even some tools for interpolating higher frame rates (e.g.Twixtor for AE). But there are no straight forward ways of exposing longer than your frame rate allows.

Sorry, but while you can do high frame rates with large motion blur values on the computer, it doesn't work like that for film/video. I've written a whole long post as to why it doesn't in a thread below, but the short of it is this:you can't get more motion blur than your frame rate allows. If you're shooting 60fps, that means 1/60 second or less of motion blur, which isn't much. In the CG and gaming world, there are cheats around this. But again this doesn't work for film/video (unless you add it in post, but again that's a CG cheat ).

Hi there. Technical director here. Just need to step in a clarify the relationship between frame rate and motion blur. I'm seeing a lot of posts that are calling for higher frame rates with more motion blur, as if they are two completely independent things. They're actually closely linked. Let me explain:

Motion blur is the effect of a moving object in the frame while the shutter is open. In photography, the time the shutter is open is called the shutter speed, and is used along with iso and aperture to control the overall exposure. If you know anything about photography, this is pretty basic stuff.

In the film world, the equivalent of shutter speed is what's known as shutter angle. This is because the shutter for film camera is a spinning disk, of which a portion lets light through and a portion blocks it as it spins. The portion, measured in degrees, that lets the light in is the shutter angle. Typically, the shutter angle used in film is 180 degrees, meaning during half that 1/24 of a second frame rate, the film is being exposed. In photographic shutter speed terms, that would be the same as 1/48. Again, not too complicated.

Here's the catch though: because your film stock is rolling by at 24 frames per second, each frame can only be exposed for 1/24 of a second or less. If you use a smaller shutter angle, or faster frame rate, you get less motion blur. What this means is there's no practical (the film industry definition of practical) way of getting more motion blur than your frame rate and shutter angle allows. The faster you go, the crisper the action will be.

So at this point you're probably wondering who cares about the amount of motion blur in a movie? The answer is: the audience. The industry has shot film at 24fps with a 180 degree shutter angle for so long that's what everyone is used to. The last thing you want is to distract your audience away from enjoying the movie because there's know there's something different about the picture quality but they can't figure out what.

Finally, I'd like to point out that this choice of frame rate, like many other subjective decisions that are made during a movie production, are made at the director's discretion. Peter Jackson is going out on a limb by shooting a movie at this frame rate, and doubtless he has his reasons for doing so (mostly due to it being shot in 3d as I recall) but it's still his call. The industry talk I hear views it as an experiment, and everyone's curious as to how it will work (or won't). If audiences do get used to it and like it, expect to see more movies shot like this, and in enough time it will be the new standard.