Comment Wall cab: You *CAN* mount servers, but watch depth (Score 1) 402
I've handled this exact same issue. I work for a property management company and have wall-mounted half-racks with big, 4U Bosch DVR's at quite a few facilities. (These are basically rack-mounted mid-tower PCs with a steel front panel and a mobo that accepts the camera feeds.) We use a garden variety wall cab which consists of a huge, huge wall bracket with the cabinet attached on a hinge for rear access.
Weight concerns? These DVRs weigh a TON; about the same as a 4U server stacked with hard drives. It's a bit of a snug fit in the back, but they've been mounted and running for years.
That being said, you most definitely can mount servers in a wallmount cab, depending on their form factor. Specifically, you're pretty much limited to mid tower servers that can be converted to rackmount. You most definitely cannot mount most servers advertised as 'rackmount' due their tendency to have a lot of depth. (Unless you're talking about SuperMicro or something.) An HP DL180, for example, will need around 6-10 inches more depth than any wall-mounted cab can provide.
So there you go.
Weight concerns? These DVRs weigh a TON; about the same as a 4U server stacked with hard drives. It's a bit of a snug fit in the back, but they've been mounted and running for years.
That being said, you most definitely can mount servers in a wallmount cab, depending on their form factor. Specifically, you're pretty much limited to mid tower servers that can be converted to rackmount. You most definitely cannot mount most servers advertised as 'rackmount' due their tendency to have a lot of depth. (Unless you're talking about SuperMicro or something.) An HP DL180, for example, will need around 6-10 inches more depth than any wall-mounted cab can provide.
So there you go.