Alternatives to Ansys CFX

Azore is software for computational fluid dynamics. It analyzes fluid flow and heat transfers. CFD allows engineers and scientists to analyze a wide range of fluid mechanics problems, thermal and chemical problems numerically using a computer. Azore can simulate a wide range of fluid dynamics situations, including air, liquids, gases, and particulate-laden flow. Azore is commonly used to model the flow of liquids through a piping or evaluate water velocity profiles around submerged items. Azore can also analyze the flow of gases or air, such as simulating ambient air velocity profiles as they pass around buildings, or investigating the flow, heat transfer, and mechanical equipment inside a room. Azore CFD is able to simulate virtually any incompressible fluid flow model. This includes problems involving conjugate heat transfer, species transport, and steady-state or transient fluid flows.

Orbital Stack, an AI and CFD web-based program, provides earlier qualitative guidance. It compares a wide range of land-use options and shapes, and highlights any red flags. It allows for climate-conscious, high performance developments that are not possible with traditional studies. Orbital Stack was developed by world-renowned experts in microclimate engineering and wind. It is a game-changer in the architecture and building design industry, providing our clients direct access for wind comfort and safety analysis as well as thermal comfort and shadowing analysis and cladding pressure simulations. This allows architects to quickly understand the climate effects of their proposed building designs and make better decisions, resulting in more resilient and high-performing projects.

SimSolid is the revolutionary simulation technology for engineers, designers, and analysts. It performs structural analyses on fully-featured CAD assemblies in minutes. SimSolid eliminates geometry preparation, meshing, and other errors that are time-consuming and difficult to perform in conventional structural simulations. Multiple design scenarios can be simulated quickly under real-life conditions. You can use any CAD model, even an early one. SimSolid tolerance for imprecise geometry means SimSolid simulation tools don't need to be simplified before analyzing designs. SimSolid supports all types of connections (bolt/nuts, bonded, rivets and sliding) and analysis for linear static, modal, and thermal properties. It also supports complex coupled, nonlinear, dynamic effects.

Utilizing the distinctive and inherently dynamic Lattice Boltzmann-based physics, the PowerFLOW CFD solution conducts simulations that effectively replicate real-world scenarios. With the PowerFLOW suite, engineers can assess product performance at the early stages of design, before any prototypes are constructed—this is when alterations can have the most substantial effects on both design and budget. The PowerFLOW system seamlessly imports intricate model geometries and conducts aerodynamic, aeroacoustic, and thermal management simulations with high accuracy and efficiency. By automating domain discretization and turbulence modeling along with wall treatment, it removes the need for manual volume meshing and boundary layer meshing. Users can confidently execute PowerFLOW simulations using a large number of compute cores on widely utilized High Performance Computing (HPC) platforms, enhancing productivity and reliability in the simulation process. This capability not only accelerates product development timelines but also ensures that potential issues are identified and addressed early in the design phase.

Ansys Icepak serves as a computational fluid dynamics (CFD) solver specifically designed for managing thermal issues in electronic devices. It offers insights into airflow, temperature distributions, and heat transfer phenomena within integrated circuit packages, printed circuit boards (PCBs), electronic assemblies, and power electronics. By leveraging the top-tier Ansys Fluent CFD solver, Ansys Icepak delivers robust cooling solutions tailored for electronic components, allowing for thorough thermal and fluid flow evaluations. The software operates through the Ansys Electronics Desktop (AEDT) graphical user interface (GUI), facilitating comprehensive analyses of heat transfer involving conduction, convection, and radiation. Moreover, it boasts sophisticated features for modeling both laminar and turbulent flow conditions, as well as conducting species analysis that incorporates radiation and convection effects. Ansys’ extensive PCB design platform empowers users to perform simulations on PCBs, ICs, and packages, enabling a precise assessment of complete electronic systems, thereby enhancing design efficiency and performance optimization. Thus, Ansys Icepak stands out as an essential tool for engineers aiming to improve thermal management in their electronic designs.

6SigmaET is a sophisticated tool for thermal modeling in electronics that employs cutting-edge computational fluid dynamics (CFD) to produce precise simulations of electronic devices. Tailored for the electronics sector, our thermal simulation software brings unmatched intelligence, automation, and precision to assist you in fulfilling your requirements and addressing thermal design obstacles. Since its launch in 2009, 6SigmaET has rapidly emerged as the leading thermal simulation software within the electronics cooling industry. Its flexibility enables users to assess the thermal characteristics of a wide array of electronic components, from the tiniest integrated circuits to the largest, most robust servers. You can discover more about the benefits 6SigmaET offers your field by watching our informative videos or reviewing our comprehensive case studies. Additionally, 6SigmaET allows for the seamless import of complete CAD geometry and PCB designs, significantly cutting down the time needed for model creation and enhancing overall efficiency in thermal analysis. This capability streamlines the process, enabling engineers to focus more on optimization rather than on initial setup.

Various analysis tools are now accessible, allowing for the measurement of a diverse array of components, including machined parts, gears, blades, screw compressors, camshafts, and beyond, across a broad spectrum of CMMs. QUINDOS stands out as the premier modular metrology software designed for intricate geometries, utilized in industries such as aerospace, energy, automotive, and engineering. Users can select from an extensive array of modules to create precise measurement applications tailored to their needs. You can design your application while personalizing the user interface specifically for your machine operators. With its advanced programmability for even the most complex geometries, QUINDOS facilitates structured programming and offers the possibility of developing a personalized command library complete with UI support. Discover how Siemens AG Turbines implements QUINDOS alongside the I++ Simulator for high-pressure blades to effectively visualize both production and measurement processes in a unified manner. Additionally, learn how BMT Aerospace leverages QUINDOS and the I++ Simulator to enhance production efficiency through a virtual measuring room, enabling offline testing capabilities. This innovative approach not only optimizes workflow but also significantly improves accuracy in production processes.

Dive CAE is a cloud-based software platform designed for computational fluid dynamics that empowers engineers to model intricate fluid dynamics phenomena, including free-surface flows, multiphase interactions, heat transfer, and the dynamics of moving machinery, all through a mesh-free Smoothed Particle Hydrodynamics approach. Accessible directly from a web browser and optimized for high-performance computing systems, it eliminates the need for local hardware or installation processes. This innovative mesh-free method facilitates the modeling of complex geometries, accounts for surface tension, handles non-Newtonian fluids, and addresses transient flow scenarios without the cumbersome meshing and adjustments typical of traditional CFD methods. Users can quickly onboard, usually within a single day, while the software is designed to support parallel design-of-experiment workflows, allowing for numerous iterations to be completed in just hours rather than days. Dive CAE prioritizes collaboration among users, offers a straightforward licensing model (a single license for all), ensures transparent cost management, adheres to data usage governance, and provides scalability through its cloud-based architecture, making it an attractive choice for engineering teams looking to enhance their fluid dynamics simulations. This combination of features not only streamlines the simulation process but also fosters efficient teamwork and innovation in project development.

Ansys BladeModeler is a user-friendly software specifically designed for the swift creation of 3D models of rotating machinery parts. This tool facilitates the design of various types of blade components, including axial, mixed-flow, and radial blades, which are essential in devices such as pumps, compressors, fans, blowers, turbines, expanders, turbochargers, and inducers, among others. Ansys BladeModeler seamlessly integrates with Ansys DesignModeler, providing robust 3D geometry modeling capabilities that enable the addition of numerous geometric features, including hub metal, blade fillets, and various cut-offs and trims. The software allows for the combination of blade designs with non-bladed components, such as housings, blade roots, or intricate 3D tip regions, enhancing design flexibility. These non-bladed elements can be either created within the software or imported through CAD connections compatible with all leading CAD platforms, ensuring limitless design possibilities for assembly and evaluation. Users also have the option to select the degree of geometric detail they wish to incorporate into their analyses, tailoring the experience to their specific engineering needs. This versatility makes Ansys BladeModeler an invaluable tool for engineers looking to innovate in the field of rotating machinery design.

Utilize COMSOL's multiphysics software to replicate real-world designs, devices, and processes effectively. This versatile simulation tool is grounded in sophisticated numerical techniques. It boasts comprehensive capabilities for both fully coupled multiphysics and single-physics modeling. Users can navigate a complete modeling workflow, starting from geometry creation all the way to postprocessing. The software provides intuitive tools for the development and deployment of simulation applications. COMSOL Multiphysics® ensures a consistent user interface and experience across various engineering applications and physical phenomena. Additionally, specialized functionality is available through add-on modules that cater to fields such as electromagnetics, structural mechanics, acoustics, fluid dynamics, thermal transfer, and chemical engineering. Users can select from a range of LiveLink™ products to seamlessly connect with CAD systems and other third-party software. Furthermore, applications can be deployed using COMSOL Compiler™ and COMSOL Server™, enabling the creation of physics-driven models and simulation applications within this robust software ecosystem. With such extensive capabilities, it empowers engineers to innovate and enhance their projects effectively.

Ansys Fluent stands out as the premier fluid simulation software, distinguished by its cutting-edge physics modeling features and unmatched precision. By utilizing Ansys Fluent, you can dedicate more time to innovation and enhancing product efficiency. This software is backed by extensive validation across diverse applications, ensuring you can rely on its simulation outcomes. With Ansys Fluent, creating sophisticated physics models and evaluating various fluid dynamics phenomena is seamless within a user-friendly and customizable interface. This robust simulation tool significantly expedites your design process, allowing for quicker iterations and improvements. Boasting top-tier physics models, Ansys Fluent can effectively and accurately tackle intricate, large-scale simulations. The software unveils new possibilities for computational fluid dynamics (CFD) analysis. Additionally, its rapid pre-processing capabilities and swift solving times empower you to be the quickest in bringing your products to market. Fluent's unmatched features foster boundless innovation while maintaining a steadfast commitment to precision and reliability. Ultimately, Ansys Fluent not only enhances your design capabilities but also positions you ahead of the competition in a fast-paced industry.

Ansys Sherlock stands out as the sole reliability physics-based tool for electronics design that delivers quick and precise life expectancy assessments for electronic components, boards, and systems during the initial design phases. By automating the design analysis process, Ansys Sherlock enables the rapid generation of life predictions, thus eliminating the "test-fail-fix-repeat" cycle that often hampers development. Designers can effectively model the interactions between silicon–metal layers, semiconductor packaging, printed circuit boards (PCBs), and assemblies, allowing for accurate predictions of potential failure risks stemming from thermal, mechanical, and manufacturing stresses, all prior to creating prototypes. Additionally, Sherlock's extensive libraries, which house over 500,000 components, facilitate the seamless transformation of electronic computer-aided design (ECAD) files into computational fluid dynamics (CFD) and finite element analysis (FEA) models. Each of these models is equipped with precise geometries and material properties, ensuring that stress information is accurately conveyed for reliable predictions. This capability not only enhances design efficiency but also significantly reduces the risk of costly errors in the later stages of product development.

Kombyne™ represents a cutting-edge Software as a Service (SaaS) tool designed for high-performance computing (HPC) workflows, originally tailored for clients in sectors such as defense, automotive, aerospace, and academic research. This platform empowers users to access a diverse array of workflow solutions specifically for HPC computational fluid dynamics (CFD) tasks, encompassing features like on-the-fly extract generation, rendering capabilities, and simulation steering options. Users can benefit from interactive monitoring and control functionalities, all while ensuring minimal disruption to simulations and eliminating reliance on VTK. By employing extract workflows, the necessity for handling large files is significantly reduced, allowing for real-time visualization. The system incorporates an in-transit workflow that utilizes a distinct process to swiftly receive data from the solver code, enabling visualization and analysis without hindering the operation of the running solver. This specialized process, referred to as an endpoint, facilitates the direct output of extracts, cutting planes, or point samples useful for data science, in addition to rendering images. Furthermore, the Endpoint serves as a conduit to widely-used visualization software, enhancing the overall usability and integration of the tool within various workflows. With its versatile features and ease of use, Kombyne™ is set to revolutionize the way HPC tasks are managed and executed across multiple industries.

ESS has gained significant traction in the automotive sector due to our specialized solutions tailored for this niche market. As our offerings thrived in a highly competitive landscape, ESS expanded into the “on-demand” sector. With the introduction of the alsim cloud, we are accomplishing unprecedented feats in the realm of simulation technology. Our pay-per-use simulation tools are accessible to all users, regardless of their CFD background, allowing students, engineers, and businesses to leverage our advanced techniques to enhance their projects. In addition to our offline products, we cater to diverse industries by providing solutions and detailed reports derived from our simulation outputs. We engage in close collaboration with our clients to understand their specific needs and challenges, ensuring they receive precise simulation results tailored to their requirements. Drawing from our extensive experience with industrial processes and our powerful solvers, we have successfully supported several leading OEMs around the globe. This dedication to customer satisfaction and innovation continues to drive our growth and influence in the industry.

Autodesk CFD is a sophisticated software for computational fluid dynamics that allows engineers and analysts to forecast the behavior of liquids and gases with high accuracy. This tool significantly reduces the reliance on physical prototypes while enhancing understanding of fluid flow performance in various designs. It equips engineers with an extensive suite of robust tools aimed at optimizing system designs, managing thermal issues particularly in electronics cooling, and integrating Building Information Modeling (BIM) to improve occupant comfort in HVAC systems within Architecture, Engineering, and Construction (AEC) and Mechanical, Electrical, and Plumbing (MEP) sectors. Furthermore, the Application Programming Interface (API) and scripting capabilities enhance Autodesk CFD's functionalities, enabling customization and automation of routine tasks through the Decision Center. Additionally, the Decision Center streamlines the process of comparing system designs, thereby accelerating decision-making in design processes. This comprehensive approach not only improves efficiency but also empowers engineers to make more informed decisions in their projects.

Enhance engineering processes with the only comprehensive and user-friendly CFD platform designed for multidisciplinary design and optimization. Computational fluid dynamics (CFD) plays a crucial role in multiphysics system analysis, allowing for the simulation of fluid behavior and thermodynamic characteristics through advanced numerical models. Engineers leverage the Cadence Fidelity CFD platform for various design tasks, including propulsion, aerodynamics, hydrodynamics, and combustion, to enhance product efficiency while minimizing the need for costly and time-intensive physical testing. This robust Fidelity CFD platform offers a seamless end-to-end solution tailored for applications across aerospace, automotive, turbomachinery, and marine sectors. With its efficient workflows, massively parallel architecture, and cutting-edge solver technology, the platform delivers remarkable performance and accuracy, significantly boosting engineering productivity in addressing contemporary design challenges. Ultimately, Fidelity stands out by not only simplifying complex processes but also enabling engineers to innovate rapidly and effectively.

CF-MESH+, the latest version of Creative Fields' CFD meshing software, is available. It combines advanced meshing workflows and an easy-to use front-end interface to provide a superior user experience. It has a powerful set tools and functionalities to generate quality CFD meshes for complex geometries. The software is robust, which will allow you to increase your productivity and gain a competitive edge in your simulation efforts.

AM PravaH® is an advanced simulation software featuring a graphical user interface (GUI) that focuses on high-performance capabilities tailored for the field of additive manufacturing. Developed by Paanduv R&D, this software integrates parallelized computational modeling with cutting-edge numerical techniques sourced from both leading global researchers and internal expertise. Its innovative design allows for efficient simulations, making it a valuable tool for engineers and researchers in the industry.

OpenWindPower, a software developed by Bentley Systems, specializes in the analysis of offshore wind turbines and supports both fixed foundation and floating platform initiatives. This innovative tool allows users to examine various design options, forecast operational performance, and create safe, cost-efficient structures for offshore wind farms. For projects with fixed foundations, OpenWindPower delivers extensive analysis and design features tailored to offshore wind turbine foundation structures, effectively addressing the impacts of waves, winds, and mechanical loads from turbines to evaluate both fatigue and extreme conditions on the substructure and the nonlinear soil foundation. In the case of floating platform projects, the software provides sophisticated modeling features that enable the creation of intricate 3D hydrodynamic and structural models, which endure the forces from waves, currents, winds, and mechanical turbine loads. Additionally, this capability allows for time-domain simulations that accurately calculate sea pressures and inertial forces, ensuring a comprehensive structural analysis for engineers working in the offshore wind sector. The tools provided by OpenWindPower ultimately enhance the design process, allowing for more resilient and efficient offshore wind energy solutions.

Adaptive Research is excited to unveil the CAESIM 2024 simulation platform, which is now available for immediate use, featuring enhanced computational fluid dynamics modeling along with multi-physics functionalities. This latest software version introduces innovative tools and features designed to streamline the modeling process, enabling CFD engineers to achieve rapid simulation results with greater efficiency. Additionally, the platform aims to enhance user experience through improved interfaces and capabilities.

AKL FlowDesigner is an advanced computational fluid dynamics (CFD) software that facilitates wind analysis by allowing users to effortlessly import 3D models of structures or urban blocks created with modeling applications like Autodesk Revit, GRAPHISOFT ARCHICAD, Rhinoceros, and SketchUp. This software supports BIM capabilities in IFC format, making it a valuable tool for architects, designers, engineers, and consultants who can leverage it early in the design phase to comprehend and visualize airflow around their projects. By conducting early analyses, professionals can significantly decrease design time while also making a strong impression on their clients. The CFD simulations offered by AKL FlowDesigner provide substantial advantages in the architecture, engineering, and construction (AEC) sectors. Previously, simulating airflow was a daunting and time-intensive process that necessitated extensive technical expertise; however, with AKL FlowDesigner, users can easily create simulations and analyze airflow within minutes, eliminating the need for an engineering background or intricate calculations. This user-friendly approach opens up the world of CFD to a broader audience, empowering more individuals to enhance their design projects.

Experience the simulation of fluid dynamics, thermal transfer, and fluidic forces that are essential for achieving the desired outcomes of your projects. SOLIDWORKS® Flow Simulation is a user-friendly Computational Fluid Dynamics (CFD) tool integrated within SOLIDWORKS 3D CAD, allowing you to swiftly and effortlessly model the behavior of liquids and gases flowing through and around your designs to assess product efficacy and functionality. The SOLIDWORKS® suite is designed for ease of use, promoting a seamless collaboration that enhances your ability to create products in a more efficient and cost-effective manner. Through SOLIDWORKS Flow Simulation, you and your colleagues can replicate fluid movement, heat distribution, and the associated forces critical for your product's triumph. Organizations of varying sizes require cohesive solutions to foster innovation and advance their operations. By employing integrated CFD capabilities, you can effectively evaluate the impacts of fluid dynamics, thermal exchange, and associated forces on your projects, while also enabling the exploration of multiple "what if" scenarios to facilitate rapid design optimization. This approach not only enhances product quality but also accelerates the overall development process.

Simcenter STAR-CCM+ is an advanced multiphysics computational fluid dynamics (CFD) software that enables the simulation of products in conditions that mimic real-life scenarios. This software stands out by incorporating automated design exploration and optimization into the CFD toolkit accessible to engineers. With a unified platform that encompasses CAD, automated meshing, multiphysics CFD capabilities, and advanced postprocessing, it empowers engineers to thoroughly investigate the entire design landscape, facilitating quicker and more informed design choices. By leveraging the insights offered by Simcenter STAR-CCM+, the design process becomes more strategic, ultimately resulting in innovative products that surpass customer expectations. Enhancing a battery's performance across its complete operating spectrum is a complex endeavor that necessitates the concurrent optimization of various parameters. In this context, Simcenter delivers a comprehensive simulation environment tailored for the analysis and design of electrochemical systems, fostering a deeper understanding of their behavior. This holistic approach allows engineers to tackle intricate challenges with confidence and precision.

MIDAS FEA NX is an advanced finite element analysis (FEA) software designed specifically for intricate structural and civil engineering simulations, featuring an intuitive, CAD-like interface that enhances user experience alongside powerful analytical functions. The software enables engineers to easily import a variety of 3D CAD files and generate high-quality finite element meshes using both automatic and hybrid mesh techniques, thereby minimizing the time spent on manual preparation and enhancing the precision of models. With support for both linear and nonlinear analyses, it can conduct complex simulations utilizing high-performance solvers and parallel computing, making it adept at managing extensive, real-world projects with ease. MIDAS FEA NX is particularly proficient at executing refined method analyses that meet the stringent requirements of design codes for structures characterized by intricate geometries, allowing for comprehensive assessments of stress, deformation, and performance across a range of loading scenarios. Additionally, it offers seamless integration with other tools in the MIDAS COLLECTION and various structural analysis applications, ensuring a cohesive workflow for engineers. Ultimately, the robust feature set of MIDAS FEA NX positions it as a critical resource in the toolkit of any structural engineer.

Ansys SpaceClaim offers a distinctive user interface, innovative modeling technology, and a versatile set of tools that facilitate the creation and modification of imported geometries without the intricacies often found in conventional CAD systems. While managing existing CAD models, users can effortlessly de-feature and streamline geometry using automated tools that are straightforward to master. This software is particularly suited for engineers who require rapid 3D solutions but lack the time to navigate elaborate CAD tools. SpaceClaim equips analysts with capabilities that expedite geometry preparation for simulations, whether that involves de-featuring CAD models, isolating fluid domains, or converting a model to beam and shell elements. By alleviating geometry-related obstacles, SpaceClaim allows analysts to concentrate on their simulations without interruption. With enhanced control over geometry, analysts can foster simulation-driven design, reduce delays between design and analysis teams, and quickly assess how modifications to designs affect outcomes, ultimately leading to more efficient workflows and better project results. Consequently, the integration of SpaceClaim into engineering practices significantly enhances productivity and collaboration.

SimScale, a web-based cloud application, plays an important role in simulation software for many industries. The platform supports Computational Fluid Dynamics, Finite Element Analysis (FEA), as well as Thermal Simulation. It also provides 3D simulation, continuous modeling, motion & dynamic modelling.

SimFlow is a desktop Computational Fluid Dynamics analysis software for Windows OS and Linux OS. It is based upon OpenFOAM libraries and acts as an OpenFOAM GUI. It is a professional CAE package that engineers can use to create 3D simulations. SimFlow is a powerful CFD software that can be used for all purposes. SimFlow combines the intuitive graphical user interface of OpenFOAM®, with the benefits of the open-source OpenFOAM®. SimFlow is free to download and you can use it in an evaluation mode to solve some of the most difficult problems that you face as an engineer or scientist. Perhaps you use CFD software every day or just want to get started on your adventure. SimFlow is a powerful fluid simulation software that allows you to rediscover CFD without any time limits.

Ansys Cloud Direct’s powerful, easy-to-access HPC cloud solution will change the way you think about simulation. Unlike other simulation cloud solutions, Ansys Cloud Direct is simple to set up and navigate, will not break your workflow and does not require cloud experts to operate. Ansys Cloud Direct is all about Workflow, Performance, Support.

By utilizing CONSELF, you can harness the power of Computational Fluid Dynamics (CFD) and Finite Element Analysis (FEA) to enhance your product designs: reduce drag and losses related to fluid dynamics, boost efficiency, optimize heat exchange capabilities, assess pressure loads, confirm material strength, analyze deformation in component shapes, compute natural frequencies and modes, among various other functions. The platform offers both static and dynamic simulations for Structural Mechanics, accommodating the behavior of materials under elastic and plastic conditions. Additionally, it enables modal and frequency analyses, starting from widely used CAD neutral file formats, ensuring a seamless integration into your design workflow. This comprehensive approach allows for innovative solutions to complex engineering challenges.

Altair Activate is utilized to model and simulate a diverse array of products as interconnected systems, facilitating the discovery of improved designs at an accelerated pace. As products across various sectors grow more intricate, electrified, intelligent, and interconnected, the need for advanced simulation tools becomes paramount. By leveraging multi-disciplinary system-level simulation capabilities, designers can develop sophisticated mechatronic systems more holistically, fostering enhanced collaboration and streamlined workflows among product development teams. Altair Activate effectively eliminates barriers between various subsystems, including mechanical, electrical, control, and electronic components, as well as software and hardware-in-the-loop interactions, alongside data analytics. Utilizing 1D modeling and simulation for thermal-fluid system dynamics allows for nearly equivalent accuracy to traditional 3D CFD methods, while significantly reducing timeframes, thereby promoting extensive design exploration and performance optimization more efficiently. This innovative approach not only speeds up the design process but also empowers teams to create more integrated and efficient product solutions.

Ansys Discovery introduces an innovative simulation-driven design tool that integrates instant physics simulation, high-fidelity simulation, and interactive geometry modeling into a singular, user-friendly platform. This groundbreaking product merges interactive modeling with various simulation features, empowering users to tackle essential design inquiries at the early stages of the design process. By adopting this proactive approach to simulation, teams can significantly reduce time and resources spent on prototyping as they concurrently examine numerous design ideas without delays for simulation feedback. Ansys Discovery effectively addresses vital design questions swiftly and accurately, enhancing overall productivity and performance by removing prolonged waits for simulation outputs. This capability allows engineers to prioritize innovation and optimize product performance, ultimately leading to a reduction in labor costs and physical prototyping expenses. Additionally, by facilitating the early resolution of design challenges, Ansys Discovery contributes to a notable increase in return on investment (ROI) throughout your organization, making it an invaluable asset for engineering teams.

Enhance product development and accelerate the launch process with FLOW-3D, an exceptionally precise CFD software adept at addressing transient, free-surface challenges. Accompanied by our cutting-edge postprocessor, FlowSight, FLOW-3D offers a comprehensive multiphysics suite. This versatile CFD simulation platform empowers engineers to explore the dynamic interactions of liquids and gases across a diverse array of industrial sectors and physical phenomena. With a strong emphasis on multi-phase and free surface applications, FLOW-3D caters to various industries, including microfluidics, biomedical technology, civil water infrastructure, aerospace, consumer goods, additive manufacturing, inkjet printing, laser welding, automotive, offshore enterprises, and energy sectors. As a remarkably effective multiphysics resource, FLOW-3D combines functionality, user-friendliness, and robust capabilities to support engineers in achieving their modeling goals, ultimately driving innovation and efficiency in their projects. By leveraging FLOW-3D, organizations can overcome complex challenges and ensure that their designs are optimized for success in competitive markets.

OpenFAST is a publicly accessible wind turbine simulation software created by the National Renewable Energy Laboratory (NREL). It enhances the earlier FAST v8 code, merging elements of aerodynamics, hydrodynamics, control mechanisms, and structural dynamics to facilitate detailed, coupled nonlinear aero-hydro-servo-elastic time-domain simulations of wind turbines. The tool accommodates various setups, such as onshore, fixed-bottom offshore, and floating offshore turbines. Designed to cultivate an open source developer community among research institutions, industry players, and academic circles, OpenFAST offers a comprehensive software engineering framework that includes well-structured source code, automated testing processes, and compatibility across multiple platforms. Significant updates from FAST v8.16 to OpenFAST feature the creation of a new GitHub repository that centralizes modules, glue codes, and compiling utilities; a revised versioning system; and the implementation of unit testing at the subroutine level. This evolution not only improves functionality but also enhances collaboration opportunities among users and developers involved in wind energy research.

Ingrid Cloud is an online tool which automates the entire process for wind simulations. Our computational model requires virtually no human intervention. It is easy to use and accurate. CFD is easy and affordable with us. This unique technology is based upon research at KTH Royal Institute for Technology over the past 15 years.

GASP is a versatile flow solver that handles both structured and unstructured multi-block configurations, effectively addressing the Reynolds Averaged Navier-Stokes (RANS) equations along with the heat conduction equations pertinent to solid structures. It utilizes a hierarchical-tree architecture for its organization, enabling seamless pre- and post-processing within a single interface. Capable of solving both steady and unsteady three-dimensional RANS equations and their various subsets, it employs a multi-block grid topology that accommodates unstructured meshes composed of tetrahedra, hexahedra, prisms, and pyramids. Additionally, it integrates with a portable extensible toolkit designed for scientific computation, which enhances its versatility. The system achieves improved computational efficiency by uncoupling turbulence and chemistry processes. GASP is compatible with a wide array of parallel computing systems, including clusters, and ensures that the integrated domain decomposition remains user-friendly and transparent. Its robust design makes it suitable for a wide range of fluid dynamics applications.

Calculate fluid flow quickly and accurately. The Pipe Flow Calculator will be a valuable tool for engineers, students and professionals who work with fluid dynamics. It solves fluid flow problems, both simple and complex, in under a second. Why Choose Pipe Flow Calculator? Easy to Use: Just enter values to get instant results. Trusted worldwide - used daily by thousands professionals. Reliable and Updated - Bug fixes in 1-2 days. Transparent Calculations: All formulas are provided. Key Features Change between imperial and metric units. Choose pipes, materials and fluids on predefined lists. Export results to Excel & Word. Save, print and continue where you left. Copy/paste the full calculation reports. Available Calculators Pressure Drop, Pump Performance, Pipe Diameter and Reynolds Number Orifice Plates, Venturi Tubes, Nozzles, Prandtl Probe Control Valve, LPG, Thermal Energy

The Ansys HPC software suite allows users to leverage modern multicore processors to conduct a greater number of simulations in a shorter timeframe. These simulations can achieve unprecedented levels of complexity, size, and accuracy thanks to high-performance computing (HPC) capabilities. Ansys provides a range of HPC licensing options that enable scalability, accommodating everything from single-user setups for basic parallel processing to extensive configurations that support nearly limitless parallel processing power. For larger teams, Ansys ensures the ability to execute highly scalable, multiple parallel processing simulations to tackle the most demanding projects. In addition to its parallel computing capabilities, Ansys also delivers parametric computing solutions, allowing for a deeper exploration of various design parameters—including dimensions, weight, shape, materials, and mechanical properties—during the early stages of product development. This comprehensive approach not only enhances simulation efficiency but also significantly optimizes the design process.

ParaView is a versatile, open-source application designed for data analysis and visualization across multiple platforms, allowing users to create visual representations for both qualitative and quantitative data analysis. It features interactive 3D exploration capabilities alongside programmatic data processing through its batch processing functionality. Engineered to manage extremely large datasets, ParaView leverages distributed memory computing resources, making it ideal for use on supercomputers that process terascale data as well as on laptops for smaller datasets. The application is built with a client-server architecture, enabling remote visualization of data while generating level-of-detail models to ensure smooth interactive performance even with extensive data. Its extensible framework is grounded in open standards, promoting customization and integration with existing tools and workflows. ParaView supports a wide array of well-known file formats and boasts over 200 filters and tools for effective data processing and visualization. This extensive feature set allows users to tailor their analysis experiences to meet specific needs and enhances collaboration in data-intensive projects.

Part of the TotalSim family, bramble is an online platform for CFD simulations. It can be accessed by any web-enabled computer. It speeds up the pre- and post-simulation process, increasing productivity and creating consistency between simulations. The platform includes customised data management tools and analysis tools as well as CFD and because it uses OpenFOAM, there are no subscription or license charges. Bramble Offers 1. Productivity increases 2. Reliable results 3. Customized data management 4. Simulations that are cost-effective 5. A platform that is easy to use 6. Scalable simulations Bramble also rents and sells the hardware required to run CFD simulations.

Ansys Mechanical stands out as an exceptional finite element solver, featuring capabilities in structural, thermal, acoustics, transient, and nonlinear analyses to enhance your modeling processes. This powerful tool allows you to tackle intricate structural engineering challenges, facilitating quicker and more informed design choices. The suite's finite element analysis (FEA) solvers permit the customization and automation of solutions for structural mechanics issues, enabling the examination of various design scenarios through parameterization. With its extensive array of analysis tools, Ansys Mechanical provides a versatile environment, guiding users from geometry preparation to integrating additional physics for enhanced accuracy. Its user-friendly and adaptable interface ensures that engineers at any experience level can swiftly obtain reliable results. Overall, Ansys Mechanical fosters an integrated platform that leverages finite element analysis (FEA) for comprehensive structural evaluations, proving invaluable for modern engineering projects.

SpectreUQ™ enhances the advanced DAKOTA software created by Sandia National Laboratories by incorporating a user-friendly wizard that assists engineers throughout the uncertainty quantification (UQ) process. The intricate details of the UQ method are managed seamlessly in the background. It employs a database to systematically organize results from both experiments and simulations, along with offering interactive visualization and graphing capabilities. Available through an annual subscription without any limits on the number of users, it also comes in source code format. Unlike many other techniques, SpectreUQ™ operates in a non-intrusive manner, allowing it to run alongside existing simulations rather than integrating directly within them. Users can leverage their own high-performance computing resources to assess numerous flight conditions and develop the built-in surrogate models. It is designed to be intuitive and user-friendly, having been refined through extensive real-world applications in UQ studies. The process of incorporating experimental data and computational fluid dynamics (CFD) results is guided by the Oberkampf-Roy method, ensuring a robust approach. Additionally, the interactive plots generated facilitate easy exploration and sharing of results, enhancing collaboration and communication among engineers. This comprehensive capability makes SpectreUQ™ a valuable tool for any engineer looking to integrate UQ into their workflow.

GE Vernova provides a range of Digital Optimization services through its PowerUp platform, aimed at equipping wind farm operators with advanced digital analytics tools that can potentially boost turbine efficiency and enhance annual energy output by as much as 8%. The PowerUp system performs an in-depth analysis of each turbine's configuration, historical performance, and operational data, taking into account the unique environmental conditions of the site, to set a performance baseline and pinpoint opportunities for improving annual energy production (AEP). By integrating turbines with the industrial internet, this platform facilitates real-time adjustments to production based on various factors specific to each turbine, including environmental, operational, and economic influences. This adaptable, results-oriented solution can be utilized for both new and pre-existing service agreements, ensuring that operators are charged solely for verified performance enhancements. Overall, this innovative approach not only maximizes energy production but also supports sustainability efforts in the renewable energy sector.

The Cadence Clarity 3D Solver is a sophisticated software tool designed for 3D electromagnetic simulation, specifically aimed at creating essential interconnects for printed circuit boards, integrated circuit packages, and systems integrated on chip designs. This powerful tool assists engineers in overcoming intricate electromagnetic issues encountered in the development of systems for advanced technologies such as 5G, automotive applications, high-performance computing, and machine learning, all while ensuring top-tier accuracy. Leveraging Cadence’s state-of-the-art distributed multiprocessing capabilities, the Clarity 3D Solver provides virtually limitless capacity and enhances processing speed by tenfold, making it possible to tackle extensive and complicated structures with ease. Additionally, it generates precise S-parameter models that cater to high-speed signal integrity, power integrity, high-frequency RF/microwave applications, and electromagnetic compliance assessments, ensuring that simulation outcomes align closely with laboratory measurements, even for data transfer rates exceeding 112Gbps. Consequently, this tool stands as a vital asset for engineers looking to push the boundaries of technology in their designs.

Ansys Lumerical FDTD stands as the premier choice for simulating nanophotonic devices, processes, and materials. Its integrated design environment features robust scripting capabilities, sophisticated post-processing options, and optimization routines. This meticulously refined application of the FDTD method ensures exceptional solver performance across a wide range of applications. With these tools at your disposal, you can concentrate on the creative aspects of your design while relying on the software to handle the technical complexities. The platform offers a variety of advantages that facilitate flexible and customizable modeling and simulation. By leveraging Ansys Lumerical FDTD, you can effectively model nanophotonic devices, processes, and materials, thus empowering your innovative pursuits. Ultimately, Lumerical FDTD exemplifies excellence in the field, delivering dependable, powerful, and scalable solver performance tailored to meet diverse application needs.

WindESCo delivers innovative solutions aimed at improving the efficiency and dependability of wind turbines through two core products: Pulse and Swarm. Pulse harnesses artificial intelligence and machine learning to provide in-depth performance analytics and monitor the health of assets over twelve turbine subsystems. By consolidating various data streams—such as SCADA, events, maintenance history, vibration analysis, and meteorological information—into a cohesive data fabric, it empowers users to pinpoint actionable insights that influence turbine efficiency. Additionally, Pulse includes case management capabilities that facilitate operational and maintenance workflows, track the progress of resolutions, and keep all essential information centralized. On the other hand, Swarm employs a collective autonomous control system, allowing turbines to communicate and learn from one another, which significantly enhances the output of wind farms. Together, these technologies represent a significant advancement in the management and optimization of wind energy resources.