Alternatives to CoTherm

Azore is software for computational fluid dynamics. It analyzes fluid flow and heat transfers. CFD allows engineers and scientists to analyze a wide range of fluid mechanics problems, thermal and chemical problems numerically using a computer. Azore can simulate a wide range of fluid dynamics situations, including air, liquids, gases, and particulate-laden flow. Azore is commonly used to model the flow of liquids through a piping or evaluate water velocity profiles around submerged items. Azore can also analyze the flow of gases or air, such as simulating ambient air velocity profiles as they pass around buildings, or investigating the flow, heat transfer, and mechanical equipment inside a room. Azore CFD is able to simulate virtually any incompressible fluid flow model. This includes problems involving conjugate heat transfer, species transport, and steady-state or transient fluid flows.

Ansys Motor-CAD serves as a specialized tool for the design of electric machines, facilitating rapid multiphysics simulations throughout the entire torque-speed operating range. It allows design engineers to assess various motor configurations and concepts to create designs that maximize performance, efficiency, and compactness. With its four integrated modules—EMag, Therm, Lab, and Mech—Motor-CAD enables quick and iterative multiphysics calculations, significantly reducing the time from initial concept to finalized design. This efficiency in calculations and streamlined data input processes provides users with the opportunity to investigate a broader array of motor topologies and thoroughly evaluate the effects of advanced loss mechanisms in the early phases of electromechanical design. The latest release boasts enhanced capabilities for design optimization, multiphysics analysis, and system modeling tailored specifically for electric motors, ensuring that engineers have the tools they need for cutting-edge development. Ultimately, Motor-CAD's fast multiphysics simulation capabilities across the full torque-speed range empower engineers to innovate and refine electric motor designs with unprecedented efficiency.

ReliaSoft provides a powerful set of reliability software solutions that facilitate a comprehensive range of reliability engineering modeling techniques and analysis techniques. We are the leading provider of reliability solutions for product testing, design, maintenance strategies and optimization. Our products support a variety of reliability and maintainability techniques, including life data analysis, accelerated lifetime testing, system modeling and RAM analysis. We also support reliability growth, FRACAS analysis, FMEA analysis and RCM analysis. These tools help you improve the reliability of your products and processes, and optimize maintenance planning.

Ansys Fluent stands out as the premier fluid simulation software, distinguished by its cutting-edge physics modeling features and unmatched precision. By utilizing Ansys Fluent, you can dedicate more time to innovation and enhancing product efficiency. This software is backed by extensive validation across diverse applications, ensuring you can rely on its simulation outcomes. With Ansys Fluent, creating sophisticated physics models and evaluating various fluid dynamics phenomena is seamless within a user-friendly and customizable interface. This robust simulation tool significantly expedites your design process, allowing for quicker iterations and improvements. Boasting top-tier physics models, Ansys Fluent can effectively and accurately tackle intricate, large-scale simulations. The software unveils new possibilities for computational fluid dynamics (CFD) analysis. Additionally, its rapid pre-processing capabilities and swift solving times empower you to be the quickest in bringing your products to market. Fluent's unmatched features foster boundless innovation while maintaining a steadfast commitment to precision and reliability. Ultimately, Ansys Fluent not only enhances your design capabilities but also positions you ahead of the competition in a fast-paced industry.

Orbital Stack, an AI and CFD web-based program, provides earlier qualitative guidance. It compares a wide range of land-use options and shapes, and highlights any red flags. It allows for climate-conscious, high performance developments that are not possible with traditional studies. Orbital Stack was developed by world-renowned experts in microclimate engineering and wind. It is a game-changer in the architecture and building design industry, providing our clients direct access for wind comfort and safety analysis as well as thermal comfort and shadowing analysis and cladding pressure simulations. This allows architects to quickly understand the climate effects of their proposed building designs and make better decisions, resulting in more resilient and high-performing projects.

The Pyris™ software platform breathes life into your PerkinElmer thermal analysis instruments and data, establishing itself as the standard for high-sensitivity thermal analysis. Known for its intuitive and user-friendly interface, Pyris stands out in the field of thermal analysis, offering a comprehensive suite of features that provides unparalleled flexibility. Whether utilized in a fully automated research environment, a quality assurance laboratory, or as a standalone tool, Pyris software is designed to fulfill a variety of operational needs. We prioritize user satisfaction by continuously improving the software based on feedback from our customers. With a unified platform across all instruments, users benefit from an easy-to-navigate system that is quick to master. Pyris software maintains its ease of use while ensuring robust capabilities, allowing for seamless data acquisition and analysis within a single interface, all while enabling the operation of multiple analyzers concurrently. This platform also boasts a diverse range of analytical options and offers flexibility for data import and export, making it a versatile choice for any thermal analysis task. Thus, Pyris software not only streamlines processes but also enhances productivity for users across various applications.

Ansys Sherlock stands out as the sole reliability physics-based tool for electronics design that delivers quick and precise life expectancy assessments for electronic components, boards, and systems during the initial design phases. By automating the design analysis process, Ansys Sherlock enables the rapid generation of life predictions, thus eliminating the "test-fail-fix-repeat" cycle that often hampers development. Designers can effectively model the interactions between silicon–metal layers, semiconductor packaging, printed circuit boards (PCBs), and assemblies, allowing for accurate predictions of potential failure risks stemming from thermal, mechanical, and manufacturing stresses, all prior to creating prototypes. Additionally, Sherlock's extensive libraries, which house over 500,000 components, facilitate the seamless transformation of electronic computer-aided design (ECAD) files into computational fluid dynamics (CFD) and finite element analysis (FEA) models. Each of these models is equipped with precise geometries and material properties, ensuring that stress information is accurately conveyed for reliable predictions. This capability not only enhances design efficiency but also significantly reduces the risk of costly errors in the later stages of product development.

6SigmaET is a sophisticated tool for thermal modeling in electronics that employs cutting-edge computational fluid dynamics (CFD) to produce precise simulations of electronic devices. Tailored for the electronics sector, our thermal simulation software brings unmatched intelligence, automation, and precision to assist you in fulfilling your requirements and addressing thermal design obstacles. Since its launch in 2009, 6SigmaET has rapidly emerged as the leading thermal simulation software within the electronics cooling industry. Its flexibility enables users to assess the thermal characteristics of a wide array of electronic components, from the tiniest integrated circuits to the largest, most robust servers. You can discover more about the benefits 6SigmaET offers your field by watching our informative videos or reviewing our comprehensive case studies. Additionally, 6SigmaET allows for the seamless import of complete CAD geometry and PCB designs, significantly cutting down the time needed for model creation and enhancing overall efficiency in thermal analysis. This capability streamlines the process, enabling engineers to focus more on optimization rather than on initial setup.

Experience the full spectrum of heat transfer processes, encompassing convection, radiation, storage, and dissipation, while addressing both steady-state and transient environmental conditions. TAITherm thermal analysis software combines simplicity with robust capabilities, effectively handling solar and thermal radiation, convection, and conduction in various dynamic environments. By alleviating the complexities associated with thermal simulations, TAITherm guarantees that your designs will perform at their best in practical situations. Engineers and teams worldwide rely on TAITherm, utilizing it for diverse applications that span cutting-edge developments in fields such as automotive, electronics, wearables, military technology, architecture, and beyond. Our clients are at the forefront of innovation, leveraging thermal simulations and analysis to enhance usability, safety, and efficiency in their respective domains, ultimately pushing the limits of technological advancement. With TAITherm, the future of thermal analysis is not only accessible but also transformative for industries striving for excellence.

Harness the advantages of natural solidification thermal analyses with a cost-effective and efficient software solution. CAPlite is equipped with a user-friendly graphical interface, making it accessible for users with limited experience in casting software. Beginning with a CAD design, CAPlite provides a thorough walkthrough for every phase, from meshing to post-processing. The method of natural solidifications offers rapid thermal simulations, delivering results in mere minutes. Whether for die casting or sand casting, CAPlite is capable of pinpointing issues across all casting types. The straightforward nature of natural solidifications enhances your entire casting workflow, enabling the design of risers, gating, and chill configurations to detect flaws, while also aiding in visualizing the intricate solidification process. In addition to the robust features of natural solidifications, CAPlite offers even more resources, equipping you with the necessary tools to optimize your castings—all at a remarkably low price point. This comprehensive software empowers you to elevate your casting practices, making it an invaluable tool for both novice and seasoned professionals alike.

SimScale, a web-based cloud application, plays an important role in simulation software for many industries. The platform supports Computational Fluid Dynamics, Finite Element Analysis (FEA), as well as Thermal Simulation. It also provides 3D simulation, continuous modeling, motion & dynamic modelling.

MSC Nastran is a versatile application for multidisciplinary structural analysis, allowing engineers to conduct various assessments, including static, dynamic, and thermal analyses, in both linear and nonlinear contexts. This software integrates automated structural optimization and award-winning fatigue analysis technologies, all powered by advanced computing capabilities. Engineers leverage MSC Nastran to guarantee that structural systems possess the required strength, stiffness, and longevity to prevent failures such as excessive stresses, resonance, buckling, or harmful deformations that could jeopardize structural integrity and safety. Additionally, MSC Nastran serves to enhance the cost-effectiveness and comfort of passenger experiences in structural designs. By optimizing performance in existing frameworks or creating distinctive product features, this tool provides a competitive edge within the industry. Furthermore, it assists in addressing potential structural problems that might arise during a product's operational life, thereby minimizing downtime and reducing associated costs. Ultimately, MSC Nastran empowers engineers to innovate and refine their designs effectively.

For many years, SINDA/FLUINT has been recognized for its effective and robust capabilities in heat transfer and fluid analysis, with enhancements introduced annually. This versatile tool serves as an all-encompassing platform for simulating intricate thermal and fluid systems, applicable across a variety of sectors including electronics, automotive, petrochemicals, power generation, healthcare, and aerospace. By streamlining the design process, SINDA/FLUINT enables users to save both time and financial resources, facilitating a deeper comprehension of their complex systems. You have the power to determine what aspects are crucial and how to approach your design performance inquiries in the most efficient manner. Additionally, the software's extensibility makes it potentially the most adaptable thermal and fluid analysis tool available today. Users can select the features they desire, establish the necessary levels of precision and approximation, and specify the required outputs, ensuring a tailored experience that meets their unique needs. This flexibility allows engineers to optimize their designs effectively in the challenging landscape of modern technology.

ColdStream is a cutting-edge cloud-based platform for thermal simulation engineering that streamlines every aspect of your thermal management and cooling design workflow, covering everything from thermal analysis to the creation of thermal designs. With Diabatix's advanced thermal simulation software, your organization can accelerate product development by leveraging the latest technology available. Gain crucial insights into heat transfer, including temperature distribution, heat dissipation, fluid dynamics, thermal resistance, thermal radiation, cooling capacity, and much more. Instead of wasting time searching for the most effective heat sinks to manage the cooling of your electronic devices and products, allow ColdStream to handle the process for you. You can simply upload your geometry, configure the necessary operating conditions for the thermal simulation, and establish your heat sink design goals with just a few clicks, making the process remarkably efficient and user-friendly. This innovative approach not only saves time but also enhances the accuracy and effectiveness of your thermal management solutions.

Simcenter Nastran stands out as a leading finite element method (FEM) solver known for its exceptional computational performance, precision, dependability, and scalability. This comprehensive tool provides robust solutions for various applications, including linear and nonlinear structural analysis, structural dynamics, acoustics, rotor dynamics, aeroelasticity, thermal analysis, and optimization. One of the key benefits of having such a diverse array of solutions within a single solver is that it standardizes input/output file formats across all types of analyses, significantly streamlining the modeling process. Whether utilized as an independent enterprise solver or integrated within Simcenter 3D, Simcenter Nastran is instrumental for manufacturers and engineering firms across several sectors, including aerospace, automotive, electronics, heavy machinery, and medical devices. By catering to their vital engineering computing requirements, it enables these industries to deliver safe, reliable, and optimized designs while adhering to increasingly tighter design timelines. This versatility and efficiency make Simcenter Nastran an invaluable asset in the modern engineering landscape.

Thermal Desktop encompasses every facet of creating models, integrating various built-in objects like finite difference, finite element, and lumped capacitance that can be arranged in numerous ways. Users can incorporate thermal-specific components such as contact conductance, insulation, heat loads, and heaters, enabling the modeling of a wide range of systems from automotive parts to crewed spacecraft. The software features comprehensive parameterization, allowing input through variables and complex expressions instead of fixed numerical values. These variables, known as symbols, facilitate swift adjustments to models with minimal effort, simplifying the process of updating or maintaining them, as well as conducting sensitivity analyses and exploring hypothetical scenarios. Furthermore, this capability enhances access to SINDA/FLUINT’s modules for optimization and reliability, along with automated model correlation, ultimately enriching the modeling experience. By streamlining these processes, Thermal Desktop not only improves efficiency but also fosters innovation in thermal analysis.

Ansys Mechanical stands out as an exceptional finite element solver, featuring capabilities in structural, thermal, acoustics, transient, and nonlinear analyses to enhance your modeling processes. This powerful tool allows you to tackle intricate structural engineering challenges, facilitating quicker and more informed design choices. The suite's finite element analysis (FEA) solvers permit the customization and automation of solutions for structural mechanics issues, enabling the examination of various design scenarios through parameterization. With its extensive array of analysis tools, Ansys Mechanical provides a versatile environment, guiding users from geometry preparation to integrating additional physics for enhanced accuracy. Its user-friendly and adaptable interface ensures that engineers at any experience level can swiftly obtain reliable results. Overall, Ansys Mechanical fosters an integrated platform that leverages finite element analysis (FEA) for comprehensive structural evaluations, proving invaluable for modern engineering projects.

AnyCasting Software has established itself as a premier casting simulation tool for more than two decades. At present, we collaborate with manufacturers in sectors such as automotive, maritime, heavy materials, and electronics, having successfully sold over 600 licenses globally while providing expert consulting for more than 470 projects across various regions. The software offers advanced stress analysis capabilities, allowing users to effectively simulate deformation alongside heat and stress factors, while also facilitating automatic mold design to help in achieving the best mold configurations. Among our satisfied domestic clients are notable names like Hyundai Motors, Hyundai Heavy Industries, Samsung Electronics, and LG Electronics, among others. Furthermore, the software allows for precise identification of gas defects that may arise from air entrapment during the filling and flowing of molten material. By analyzing the pressure differentials between air and the melt, our technology successfully pinpoints these gas defects, enhancing the overall quality and efficiency of the casting process. This level of detail and precision showcases the software's commitment to improving manufacturing outcomes.

Energy2D is an interactive multiphysics simulation program grounded in computational physics, designed to model the three primary modes of heat transfer: conduction, convection, and radiation, while also integrating particle dynamics. This software operates efficiently on a wide range of computers, simplifying the process by removing the need for switches between preprocessors, solvers, and postprocessors that are usually necessary for computational fluid dynamics simulations. Users can create "computational experiments" to explore scientific hypotheses or address engineering challenges without the need for intricate mathematical formulations. Additionally, development is ongoing to introduce various energy transformation types and to enhance support for different fluid types. While Energy2D excels in accurately modeling conduction, its representations of convection and radiation are not entirely precise, which means results involving these elements should be regarded as qualitative. Over 40 scientific papers have utilized Energy2D as a valuable research instrument, showcasing its adoption in the academic community. As the program evolves, its capabilities are expected to expand further, potentially offering more comprehensive insights into complex physical interactions.

SABR is a comprehensive package specifically designed for the conception and design of shafts, gears, and bearings. Its development focuses on seamlessly integrating into the design workflow to significantly shorten the product development cycle, offering an easy-to-use graphical interface that enables detailed modeling of transmission systems tailored to the current phase of the design. Furthermore, SABR facilitates sensitivity analyses to assess the impact of various geometric characteristics, types of bearings, and gear placements, providing instantaneous feedback. The underlying solvers are rooted in recognized engineering standards and leverage Ricardo’s extensive experience in product design, manufacturing, and testing, ensuring they remain current with practical testing and development initiatives. With a straightforward and user-friendly graphical interface, users can efficiently create accurate models. The software also supports bearing analysis, including life calculations and stress visualizations that take loading and misalignment into consideration. Additionally, it accommodates complex duty cycles with various load paths and supports the design of parallel, epicyclic, and bevel gears, making it a versatile tool in the field.

Simufact Additive is an advanced and adaptable software tool designed for simulating metal-based additive manufacturing techniques. Learn how to effectively utilize Simufact Additive to enhance your metal 3D printing and rapid prototyping efforts. By employing this software, you can greatly minimize the need for numerous test prints. Our objective is to furnish you with a solution that enables the production of additive manufacturing components with consistent dimensional accuracy on the first attempt. The multi-scale approach of Simufact Additive integrates the most effective methods into a singular software solution, ranging from a rapid mechanical technique to an intricate thermal-mechanical coupled transient analysis that offers exceptional precision in simulation results. Users can select the most suitable simulation method according to their specific requirements. Simufact Additive stands out as a specialized software solution focused solely on the simulation of additive manufacturing processes, which is evident in its streamlined operating framework. This focused approach not only enhances usability but also improves overall efficiency in the design and production workflow.

Tackle intricate engineering problems by improving the efficiency of simulations. Simcenter 3D stands out as one of the most thorough and seamlessly integrated CAE solutions available. It allows you to create and assess the performance of complex products through groundbreaking advancements in simulation efficiency. By bringing together various physics domains within a single modeling environment, you can quickly gain deeper insights into how your product performs. This integrated platform facilitates all aspects of CAE pre- and post-processing, allowing for a streamlined workflow. With unmatched tools for geometry manipulation, you can easily defeature and simplify CAD geometry from any origin. Additionally, its extensive meshing and modeling capabilities cater to diverse simulation needs, granting you the exceptional ability to connect your analysis model with design data seamlessly. This connection not only accelerates the often tedious modeling process but also ensures that your analysis models remain aligned with the most current design iterations, ultimately enhancing productivity and accuracy in your engineering projects. By adopting Simcenter 3D, you can significantly reduce development time while improving the quality of your simulations.

The STARe software represents the benchmark in thermal analysis, offering virtually endless evaluation opportunities. Its distinctive attributes encompass modular design, adaptability, and automation capabilities. Additionally, the software ensures compliance within regulated sectors. All thermal analysis systems are managed through a single, robust software platform, streamlining operations. We provide an extensive range of thermal analysis systems featuring an exceptional assortment of instruments tailored to various needs. STARe not only boasts ease of use but also powerful functionality. Users can send measurements and experiments to the instruments, allowing for immediate evaluation of the resulting curves according to their preferences. By establishing the standard for thermal analysis software, STARe proves to be a remarkably versatile tool that delivers exceptional flexibility and boundless evaluation possibilities. Furthermore, STARe serves as the central software driving all of METTLER TOLEDO’s thermal analysis systems, which significantly enhances overall workflow efficiency. This comprehensive approach ensures that users can rely on STARe for all their thermal analysis needs.

After over 34 years of refinement and input from users, Simcenter Flotherm has established itself as the premier software for electronic cooling simulations, specifically tailored for thermal analysis of electronics. This powerful tool accelerates product development across various levels, from IC packaging and PCB design to expansive systems like data centers. By utilizing rapid and precise CFD simulations, it enhances thermal management in electronics, ensuring reliability from the initial pre-CAD exploration phase to the ultimate verification stage. Simcenter Flotherm seamlessly integrates into the electronics development process, enabling thermal engineers to conduct simulations that yield prompt and precise results, which are crucial for collaboration with other engineering teams. Furthermore, it facilitates informed decision-making regarding thermal management from the initial architectural stages to the final verification of thermal designs. This comprehensive approach not only shortens development timelines but also mitigates the risks associated with expensive reliability failures and late-stage redesigns. In essence, Simcenter Flotherm stands as a vital resource for any organization aiming to enhance its electronic product performance while maintaining efficiency and reliability.

Additive Works specializes in software solutions designed to ensure a "first-time-right" additive manufacturing process, which is achieved by incorporating advanced analysis and simulation tools into the Laser Beam Melting (LBM, SLM, DMLS, Metal 3D Printing) workflow. Responding to the evolving demands and challenges within the realm of industrial additive manufacturing, their software suite Amphyon aims to drastically lower pre-processing expenses while advancing the automation of metal additive manufacturing. The ASAP-Principle outlines four essential steps towards establishing a stable, efficient, and trustworthy process chain: Assessment, Simulation, Adaption, and the Process itself. During the Assessment phase, a comprehensive evaluation of all potential build orientations is conducted, taking into account both economic and physical factors, which allows for the identification of design constraints and the determination of optimal orientations. This meticulous approach not only enhances the efficiency of the manufacturing process but also ensures higher quality outcomes in the final products.

Netfabb® software offers robust features for preparing builds, enhancing designs for additive manufacturing, simulating metal printing processes, and organizing CNC post-processing. Users can import models from numerous CAD formats and utilize repair features to swiftly fix any issues. To ensure models are ready for production, adjustments can be made to wall thicknesses, surface roughness, and other characteristics. The software identifies support necessities, allowing users to generate support structures with semi-automated tools. It also facilitates the conversion of organic, free-form mesh files into boundary representation models, which can be exported in formats like STEP, SAT, or IGES for CAD applications. Furthermore, 2D and 3D packing algorithms help arrange parts efficiently within the build volume. Custom reports can be created to encompass essential manufacturing and quoting details, while users can formulate build strategies and set toolpath parameters to optimize surface quality, part density, and processing speed. This comprehensive suite makes it easier for manufacturers to streamline their workflows and improve production efficiency.

MATLAB® offers a desktop environment specifically optimized for iterative design and analysis, paired with a programming language that allows for straightforward expression of matrix and array mathematics. It features the Live Editor, which enables users to create scripts that merge code, output, and formatted text within an interactive notebook. The toolboxes provided by MATLAB are meticulously developed, thoroughly tested, and comprehensively documented. Additionally, MATLAB applications allow users to visualize how various algorithms interact with their data. You can refine your results through repeated iterations and then easily generate a MATLAB program to replicate or automate your processes. The platform also allows for scaling analyses across clusters, GPUs, and cloud environments with minimal modifications to your existing code. There is no need to overhaul your programming practices or master complex big data techniques. You can automatically convert MATLAB algorithms into C/C++, HDL, and CUDA code, enabling execution on embedded processors or FPGA/ASIC systems. Furthermore, when used in conjunction with Simulink, MATLAB enhances the support for Model-Based Design methodologies, making it a versatile tool for engineers and researchers alike. This adaptability makes MATLAB an essential resource for tackling a wide range of computational challenges.

Subjecting your designs to real-world scenarios can significantly enhance product quality while simultaneously minimizing the costs associated with prototyping and physical testing. The SOLIDWORKS® Simulation suite offers a user-friendly collection of structural analysis tools that employ Finite Element Analysis (FEA) to forecast how a product will behave in actual physical conditions by virtually evaluating CAD models. This comprehensive portfolio is equipped with capabilities for both linear and non-linear static and dynamic analyses. With SOLIDWORKS Simulation Professional, you can refine your designs by assessing mechanical resistance, durability, topology, natural frequencies, as well as examining heat transfer and potential buckling issues. Additionally, it facilitates sequential multi-physics simulations to enhance design accuracy. On the other hand, SOLIDWORKS Simulation Premium allows for an in-depth assessment of designs concerning nonlinear and dynamic responses, dynamic loading conditions, and composite materials. This advanced tier also features three specialized studies: Non-Linear Static, Non-Linear Dynamic, and Linear Dynamics, ensuring a thorough evaluation of your engineering projects. By leveraging these powerful tools, engineers can achieve greater design confidence and innovation.

FloCAD® serves as an add-on module for Thermal Desktop®, creating a comprehensive software solution for thermohydraulic analysis that encompasses fluid flow and heat transfer. The process of constructing fluid flow models in FloCAD closely resembles that of thermal models, allowing for the use of numerous shared commands across both model types. Users can create FloCAD models using a free-form approach, which allows for the simplification and abstraction of flow networks, or they can opt for geometry-based modeling that incorporates elements like pipe centerlines, cross-sections, and intricate vessels, as well as convection calculations linked to finite difference or finite element thermal structures. As an advanced tool for pipe flow analysis, FloCAD effectively accounts for pressure losses within piping networks arising from bends, valves, tees, and variations in flow area, among other factors. This versatility makes FloCAD a valuable asset for engineers looking to optimize system designs.

Currently, engineering teams frequently rely on specialized simulation tools from various vendors to assess different design characteristics, which can lead to inefficiencies and higher costs due to the use of multiple software solutions. To address these challenges, SIMULIA offers a comprehensive suite of cohesive analysis products that enable users with varying levels of simulation knowledge and expertise to collaborate effectively while sharing simulation data and approved methodologies without compromising information integrity. The Abaqus Unified FEA product suite provides robust and comprehensive solutions for both standard and advanced engineering challenges, catering to a wide range of industrial applications. In the automotive sector, engineering teams can analyze complete vehicle loads, dynamic vibrations, multibody systems, impact and crash scenarios, nonlinear static situations, thermal interactions, and acoustic-structural relationships, all while utilizing a unified model data structure and integrated solver technology. This seamless integration enhances collaboration and improves the overall efficiency of the engineering process, allowing teams to innovate more rapidly.

Design Force is a revolutionary innovation in electrical design. It allows you to break down the boundaries of your electrical design process. The process of designing a product is becoming more complex. This often involves technologies that are difficult or impossible to use ECAD tools to address. Design Force allows design teams to access system-level design information as early as the planning and conceptual phases. This allows them to layout each product board while simultaneously considering the entire system view. Design Force uses the most current industry hardware and software. Users can design in a native 3D environment. This allows them to achieve optimal performance by using native 64-bit, multithreading, multicore processors. Design Force is compatible with multiple client-server implementations. You can also work from your corporate cloud.

HEEDS is an advanced software suite designed for design space exploration and optimization that seamlessly connects with various commercial computer-aided design (CAD) and computer-aided engineering (CAE) tools to foster product innovation. By automating analysis workflows, HEEDS significantly speeds up the product development cycle (Process Automation), optimizes the use of computational resources (Distributed Execution), and conducts thorough explorations of the design landscape for creative solutions (Efficient Search), while also ensuring that new designs meet performance standards through rigorous assessment (Insight & Discovery). The software facilitates automated workflows, streamlining the product development process for users. HEEDS boasts a comprehensive array of pre-built interfaces for numerous CAD and CAE applications, allowing for rapid and effortless integration of different technologies without requiring custom scripts. Moreover, data can be shared automatically among various modeling and simulation tools to assess and compare performance trade-offs effectively, enhancing decision-making in the design process. This interconnectedness not only saves time but also leads to more innovative and effective product solutions.

Utilize COMSOL's multiphysics software to replicate real-world designs, devices, and processes effectively. This versatile simulation tool is grounded in sophisticated numerical techniques. It boasts comprehensive capabilities for both fully coupled multiphysics and single-physics modeling. Users can navigate a complete modeling workflow, starting from geometry creation all the way to postprocessing. The software provides intuitive tools for the development and deployment of simulation applications. COMSOL Multiphysics® ensures a consistent user interface and experience across various engineering applications and physical phenomena. Additionally, specialized functionality is available through add-on modules that cater to fields such as electromagnetics, structural mechanics, acoustics, fluid dynamics, thermal transfer, and chemical engineering. Users can select from a range of LiveLink™ products to seamlessly connect with CAD systems and other third-party software. Furthermore, applications can be deployed using COMSOL Compiler™ and COMSOL Server™, enabling the creation of physics-driven models and simulation applications within this robust software ecosystem. With such extensive capabilities, it empowers engineers to innovate and enhance their projects effectively.

Digimat-AM is a software solution offered by Digimat that provides simulation capabilities for the additive manufacturing process, enabling both printer manufacturers and end-users to detect potential manufacturing challenges. Additionally, it fine-tunes printing parameters to enhance productivity and optimize the performance of the final product before the initial print is made. By leveraging numerical simulation, users can significantly reduce the number of trials needed, transforming complex testing into just a few clicks. This powerful tool equips engineers with the ability to simulate various processes, including FFF, FDM, SLS, and CFF, for both unfilled and reinforced materials. It also forecasts potential issues such as warpage, residual stresses, and the microstructure that may arise during printing. Furthermore, Digimat-AM facilitates the analysis of the intertwined thermal and structural responses in both types of polymers, ensuring that the correct manufacturing settings are established for precise printing. Ultimately, this innovative solution serves to connect the intricacies of the printing process with material properties and the performance of the final parts produced.

Simcad Pro allows you to visualize, analyze, and optimize process flow systems within an interactive simulation modeling environment. Optimize, plan, optimize, and reorganize processes and procedures, while optimizing layouts, automation, scheduling, and facility improvement. Simcad Pro integrates historical and live data to offer the best simulation tool on the marketplace. Multiple industries can use these applications, including manufacturing, automation and logistics, distribution warehouse, food & beverage, and services. Multi-Threaded – 64 bit Engine Simulator-on-the-fly - You can make real-time modifications to the model as the simulation is running. You can animated the model in 3D, 2D, and VR using Ray Tracing, light effects, and shadows. Singular model building environment. Smart, Spatially Aware Agents. Sub-Flows. Collision Avoidance. Real-Time Connectivity. Spaghetti Diagrams and Congestion Analysis, Heat Maps Efficiency, OEE. Extensive reporting and analysis tools. Scenario Analyzer.

RadCAD employs an advanced, oct-tree accelerated Monte-Carlo ray tracing algorithm to calculate radiation exchange factors and view factors with remarkable speed. The enhancements introduced by C&R Technologies in the ray tracing methodology have led to the development of a highly efficient thermal radiation analysis tool. By utilizing finite difference "conics" or curved finite elements from TD Direct®, RadCAD is capable of precisely simulating diffuse and specular reflections as well as transmissive surfaces, independent of node density. The thermal solution's requirements govern the node quantity, rather than the precision needed for radiation calculations. Furthermore, RadCAD allows users to create custom databases that specify optical properties, with each surface coating detailing its absorptivity, transmissivity, reflectivity, and specularity in both solar and infrared wavelengths. These optical characteristics can be tailored to account for variations in incident angles or wavelength dependencies, enhancing the accuracy and relevance of thermal modeling. Ultimately, this level of customization ensures that RadCAD meets diverse analytical needs across various applications.

Simufact Welding is a versatile product line that delivers extensive capabilities for simulating the elastic-plastic behavior of materials alongside structural welding processes. This software encompasses a variety of welding techniques, enabling users to model and simulate numerous thermal joining methods, including conventional arc and beam welding as well as brazing. Furthermore, it allows for the modeling of heat treatment processes, variations in cooling and unclamping setups, and the mechanical loading of welded structures. It is essential to identify critical distortions related to assembly, bulging, imbalances, and clearances during the simulation process. Users can also explore and enhance clamping tools before making any financial commitments to tool investments. This software aids in determining the most effective welding directions and sequences, ultimately leading to improved welding outcomes and more efficient production processes. Additionally, it supports engineers in refining their designs for optimal performance and reliability.

Enhance product development and accelerate the launch process with FLOW-3D, an exceptionally precise CFD software adept at addressing transient, free-surface challenges. Accompanied by our cutting-edge postprocessor, FlowSight, FLOW-3D offers a comprehensive multiphysics suite. This versatile CFD simulation platform empowers engineers to explore the dynamic interactions of liquids and gases across a diverse array of industrial sectors and physical phenomena. With a strong emphasis on multi-phase and free surface applications, FLOW-3D caters to various industries, including microfluidics, biomedical technology, civil water infrastructure, aerospace, consumer goods, additive manufacturing, inkjet printing, laser welding, automotive, offshore enterprises, and energy sectors. As a remarkably effective multiphysics resource, FLOW-3D combines functionality, user-friendliness, and robust capabilities to support engineers in achieving their modeling goals, ultimately driving innovation and efficiency in their projects. By leveraging FLOW-3D, organizations can overcome complex challenges and ensure that their designs are optimized for success in competitive markets.

The sixth-generation DYNAFORM Die Simulation Software presents an advanced platform that boasts a user-friendly and visually appealing interface designed for ease of use. Focused on the stamping process, this software minimizes the need for extensive CAE expertise and simplifies geometry and element tasks. Among its notable enhancements, users will find a well-structured tree management system for operations, a dedicated simulation data manager, and customizable icon groupings for quick access to drop-down menu features. Additionally, it offers distinct applications that operate independently, integrated pre- and post-processing capabilities, a multi-window view for better analysis, and the convenience of accessing functions with right-click options. Supporting large-scale forming simulations, the software includes a geometry management tool, a process wizard for optimizing blank sizes, a comprehensive material library, new draw bead shapes, and an efficient coordinate system manager. The combination of these features enhances the overall simulation experience, making it a powerful tool for engineers and designers alike.

Inventor® Nastran® is a finite element analysis (FEA) tool integrated within CAD software, enabling engineers and analysts to perform a diverse range of studies using various materials. This software provides comprehensive simulation capabilities that encompass both linear and nonlinear stress analysis, dynamic simulations, and heat transfer assessments. It is exclusively accessible through the Product Design & Manufacturing Collection, which includes a suite of powerful tools designed to enhance workflows within Inventor. In addition to advanced simulation features, this collection also offers 5-axis CAM, nesting tools, and access to software like AutoCAD and Fusion 360, ensuring a holistic approach to product design and manufacturing processes. By utilizing Inventor Nastran, professionals can streamline their analysis and improve their design outcomes significantly.

Engineering calculations play a crucial role in the development of products, serving as a foundation for each phase of the design process. To excel in engineering, it is vital for teams to utilize a robust yet user-friendly application that ensures accurate calculations, facilitates traceability, safeguards intellectual property, and clearly presents their methodology. PTC Mathcad seamlessly combines the convenience of an engineering notebook with the capabilities of live mathematical notation and intelligent unit management. Most notably, the calculation power offered by PTC Mathcad yields results that surpass the accuracy typically achievable through standard spreadsheet applications. With PTC Mathcad's extensive range of mathematical features, documenting essential engineering calculations is as straightforward as penning them down. Users can showcase their work with appealing formatting options, integrating plots, text, and images into a single, professionally styled document. Importantly, engaging with PTC Mathcad does not require any specialized expertise, making it accessible for all users. By leveraging this tool, engineering teams can enhance collaboration and efficiency throughout their design processes.

nCode DesignLife serves as a proactive design tool that pinpoints essential areas and estimates realistic fatigue lifespans based on top finite element (FE) analysis results applicable to both metals and composites. This innovative tool empowers design engineers to enhance their approach beyond basic stress assessments, enabling them to simulate real-world loading scenarios and thereby mitigate the risks of both under-design and over-design in their products, which can lead to expensive modifications later on. Additionally, the software offers features like virtual shaker testing, fatigue analysis for welds, vibration fatigue assessments, crack growth monitoring, fatigue evaluation for composites, and thermo-mechanical fatigue studies. It leverages advanced technologies for analyzing multiaxial stress, weld integrity, short-fiber composites, vibrational impacts, crack propagation, and thermal stress fatigue. With a user-friendly graphical interface, it facilitates comprehensive fatigue analysis using data from leading FEA tools such as ANSYS, Nastran, Abaqus, Altair OptiStruct, LS-Dyna, among others. Moreover, it incorporates multi-threaded and distributed processing capabilities, enabling efficient handling of large finite element models and optimizing overall usage schedules. This powerful combination of features ultimately ensures that engineers can deliver more reliable and efficient designs.

When utilized early in the product development process, Inspire enhances the creation, optimization, and examination of innovative and structurally efficient components and assemblies through collaborative efforts. Its award-winning interface for geometry creation and modification can be mastered within just a few hours, all while providing the robust power of Altair solvers. The structural analysis capabilities, validated by NAFEMS, allow for swift and accurate evaluations using Altair® SimSolid®, making it possible to analyze extensive assemblies and intricate parts. Additionally, it offers dynamic motion simulation and load extraction through the trusted multi-body systems analysis of Altair® MotionSolve®. Furthermore, Altair® OptiStruct® sets the industry benchmark for structural efficiency with its topology optimization, facilitating generative design that yields practical and manufacturable geometries. Inspire empowers both simulation analysts and designers to conduct what-if analyses more quickly and easily, fostering an environment of collaboration and innovation. This approach not only enhances productivity but also encourages teams to explore a wider range of design possibilities earlier in the development cycle.

HyperWorks offers easy-to-learn and effective workflows that leverage domain expertise and increase team productivity. This allows for efficient development of today's complex and connected products. Engineers can now move seamlessly from one domain to another with the new HyperWorks experience. They can even create reports without ever leaving the model. HyperWorks allows you to create, explore, and optimize designs. These designs can accurately model structures, mechanisms and fluids as well as electrical, embedded software, systems designs, and manufacturing processes. The solution-specific workflows improve a variety of engineering processes, including fatigue analysis, CFD modeling, concept design optimization, design exploration, and CFD modeling. Each interface is intuitive and well-designed, and differentiated for each user. It's also consistent and easy to use.

Simcenter MAGNET serves as an advanced simulation tool for analyzing electromagnetic fields, enabling users to predict the performance of various components such as motors, generators, sensors, transformers, actuators, and solenoids that involve permanent magnets or coils. By facilitating low-frequency electromagnetic field simulations, Simcenter MAGNET offers comprehensive modeling capabilities that accurately represent the underlying physics of electromagnetic devices. Among its features are the modeling of manufacturing processes, temperature-sensitive material properties, and the intricate behavior of magnetization and de-magnetization, along with vector hysteresis models. The software’s built-in motion solver incorporates a six-degree-of-freedom functionality, which allows for the precise modeling and analysis of complex scenarios such as magnetic levitation and intricate motion dynamics. This advanced capability is bolstered by innovative smart re-meshing technology, ensuring that even the most challenging electromagnetic problems can be effectively addressed. Consequently, Simcenter MAGNET stands out as an essential tool for engineers and designers looking to optimize electromagnetic systems in a range of applications.