Alternatives to BeamChek

SkyCiv Structural 3D, a cloud-based Structural Analysis program, allows users to design, analyze, and model complex 3D structures. It can be used online and does not require installation. SkyCiv Structural 3D is the best online structural analysis. It includes the following: – Powerful Analysis: Linear and P-Delta Cables, Buckling Plates, Frequency RS - Integrated design checks for steel, wood connections, foundations wind (AISC. NSD. AISI. EN. AS. CSA. BS plus more ...)

SimSolid is the revolutionary simulation technology for engineers, designers, and analysts. It performs structural analyses on fully-featured CAD assemblies in minutes. SimSolid eliminates geometry preparation, meshing, and other errors that are time-consuming and difficult to perform in conventional structural simulations. Multiple design scenarios can be simulated quickly under real-life conditions. You can use any CAD model, even an early one. SimSolid tolerance for imprecise geometry means SimSolid simulation tools don't need to be simplified before analyzing designs. SimSolid supports all types of connections (bolt/nuts, bonded, rivets and sliding) and analysis for linear static, modal, and thermal properties. It also supports complex coupled, nonlinear, dynamic effects.

MasterSeries PowerPad represents a comprehensive suite for structural analysis and design, making it an excellent choice for engineers seeking extensive design features at a remarkably low cost. By offering scaled-down versions of its primary analysis and design tools, MasterSeries PowerPad ensures that a variety of established programs are accessible for less than one-third of their standard pricing. Central to PowerPad is the robust MasterFrame analysis module, which seamlessly connects with design modules for steel, concrete, composite, and timber, creating a fully integrated, three-dimensional analysis and design workspace. Additionally, the PowerPad (Student Edition) is available for free, providing students access to our commercial PowerPad Plus suite. Unlike mere proformas, PowerPad bundles lightweight versions of true software applications, including straightforward designs for steel, concrete, and timber beams, along with the capability to analyze beams, trusses, plane frames, grillages, and space frames. This extensive functionality supports engineers in executing a wide array of design projects efficiently.

In the intuitive interface of 123Build, users can effortlessly sketch a beam of a frame structure directly on the screen. Following this, the model is enhanced through a graphical and interactive process that incorporates boundary conditions along with both permanent and variable loads. 123Build takes care of the complexities, consistently producing optimal outcomes such as beams with minimal height, steel profiles with reduced weight, or girders that adhere to maximum deflection limits, allowing for both efficient and rapid design. This comprehensive solution encompasses all essential features required for effective structural design, culminating in the generation of a concise and easily understandable analysis report. Additionally, 123Build provides a detailed reinforcement sketch along with a material quantity list, which includes the total volume of timber and concrete, the overall weight and volume of reinforcement, as well as the painting surface and steel weight, ensuring a thorough understanding of the project’s requirements. This all-in-one approach not only streamlines the design process but also enhances accuracy in material estimation and structural integrity.

ASTRA Pro features optional applications for structural analysis and design tailored to reinforced cement concrete (RCC) framed multi-story buildings, RCC tunnel linings supported by steel ribs, and RCC portals that take into account rock quality designation (RQD) and rock mass rating (RMR), as well as designs for RCC and prestressed concrete (PSC) jetties. The software provides comprehensive analysis and design information in a step-by-step format, along with a complete array of editable CAD drawings. However, in the demo version, users cannot modify the default input data, and the available drawings are restricted to view-only access. Each design module is accompanied by complete reports and drawings, forming a cohesive set. Additionally, detailed estimations for bill of quantities (BoQ), item rates, and costs are available for various types of bridges, including girder bridges, box-type bridges/culverts, and composite bridges. ASTRA Pro serves as a specialized tool for engineering design, facilitating the creation of RCC 'T' girder bridges, composite bridges featuring steel plate or box girders, and RCC deck slabs configured for both single and multi-span layouts, whether straight or curved, as well as PSC 'I' girder bridges, PSC box girder bridges, continuous PSC box girder structures, and steel truss bridges. This software not only enhances design accuracy but also streamlines the engineering workflow for a variety of complex structures.

RSTAB is a powerful software that allows structural engineers to meet the requirements of modern civil engineering. It provides a 3D beam, frame or truss calculation. Use the RSTAB software to design beam, frame or truss constructions made of steel, concrete, wood, aluminum or other materials. RSTAB allows you to quickly and easily define a structure model, then calculate internal forces, deformations and support reactions. You can use the design add-ons to take into account material- and standard specific requirements.

VABS is a widely-used tool for cross-sectional analysis that allows for rapid and straightforward computation of beam characteristics and the recovery of 3D fields in composite beams, such as those found in helicopter and wind turbine blades. It stands out as the sole tool that can effectively decouple an intricate 3D slender solid with a detailed microstructure into a fundamental engineering beam model. Originating from the aerospace sector, AnalySwift has developed tools specifically for composite beams including helicopter rotor blades, propellers, high aspect ratio wings, and wing section designs, in addition to plates, shells, and 3D structures. With several years of application in the wind turbine industry, VABS consistently provides swift and precise results for wind turbine blade modeling. Furthermore, SwiftComp extends its capabilities to offer solutions for plates, shells, and 3D composite structures. As the automotive industry increasingly incorporates composites into vehicle design, there is a growing potential to utilize both SwiftComp and VABS for modeling a diverse range of structural forms, such as beams, plates, and shells, thereby expanding their applicability. The versatility of these tools makes them invaluable across multiple engineering disciplines.

IDEA StatiCa 25.0 stands out as a premier structural design software that empowers engineers to efficiently model, analyze, and perform code checks on steel connections, concrete D-regions, and anchoring systems with remarkable speed and precision. This software allows users to design and validate anchors or cast-in plates with various rebar shapes, such as U-, L-, or I-shaped, in customized foundations, leveraging a 3D Component-Based Finite Element Method (CBFEM) engine. Additionally, it facilitates the design and comprehensive verification of concrete walls and D-regions, complete with Ultimate Limit State (ULS) and Serviceability Limit State (SLS) reporting. Users can create a wide range of connections, from straightforward bolted or welded beam-to-column configurations to intricate moment connections, utilizing more than 250 predefined templates along with adaptable design workflows. The software's seamless integration with Building Information Modeling (BIM) and automated connections to leading CAD and Finite Element Analysis (FEA) tools guarantee that data remains synchronized throughout the design process. Moreover, its innovative Component-Based Finite Element Model accurately reflects true structural behavior rather than relying on approximations. The latest version, 25.0, enhances anchoring functionalities, simplifies the initial setup of connections, and transforms the checkbot application into a more interactive design instrument, providing engineers with a more robust toolkit for their structural design needs. This continuous evolution underscores the commitment of IDEA StatiCa to meet the ever-changing demands of modern engineering practices.

ClearCalcs cloud structural engineering software allows engineers and designers to simplify repetitive calculations using easy-to-use calculators for beams and columns, foundations, and other important information. ClearCalcs has calculators for all standards including the US, Eurocode, Australian, New Zealand, and Canadian. ClearCalcs can help you improve your productivity and design ability. Calculations can be linked together in one click, saving time and errors copy paste loads. Reports print to a simple one-page PDF for easy inspection.

AxisVM is primarily utilized for designing buildings, along with industrial and geotechnical structures. Its robust finite element solver combined with practical modeling tools makes it suitable for bridge design, as well as for developing composite structures, machines, and vehicles. In addition to standard configurations, users have access to optional design modules tailored for structures constructed from reinforced concrete, steel, timber, and masonry members and connections. Furthermore, the software's unique elements and advanced analysis capabilities enable the successful design of innovative and custom structures. Additionally, users can generate comprehensive reports that include tables, drawings, and detailed design calculations, complete with tailored headings and text. These reports are dynamically updated, automatically reflecting the latest model data and results, ensuring accuracy and relevance in documentation. This feature enhances user efficiency by simplifying the reporting process.

Vertex BD serves as a comprehensive BIM solution tailored for medium to large residential builders. This software facilitates the creation of architectural and structural drawing sets, fabrication drawings, material reports, manufacturing data, and marketing renderings, all derived from a singular building model. By automating the generation of site-specific drawing sets, Vertex BD enables production home builders to conserve significant hours that would otherwise be spent recreating drawings for various customer-selected house options. Component manufacturers and panelizers primarily utilize Vertex BD as panel prefab software, streamlining the creation of wall and floor panel fabrication drawings, structural layouts, cut lists, and additional material reports. This automation not only saves manufacturers a remarkable amount of design, drafting, and estimation time but also significantly reduces the risk of errors during construction. Furthermore, Vertex BD is compatible with both wood and cold-formed steel construction methods, making it a versatile tool in the building industry. Its ability to integrate various aspects of the building process into one platform enhances efficiency and accuracy across projects.

Framing serves as a versatile design tool tailored for timber frame and floor construction, addressing the evolving demands of the contemporary offsite construction sector. It is widely adopted by timber frame producers, structural engineers, and design firms, facilitating the creation of detailed 3D models for timber frame structures, which in turn generates thorough material schedules and manufacturing drawings suitable for both manual assembly and direct integration with industry-standard automated machinery and saws. The software excels in detailing a variety of timber frame building styles, and although it primarily operates within a 2D context, it efficiently constructs a 3D model based on user specifications, enabling straightforward verification of levels and heights throughout the process. This capability enhances accuracy and streamlines workflow, making Framing an essential resource in modern construction practices.

LIRA-SAPR is a comprehensive software package that uses BIM technology. This software is used to analyze and design different types of mechanical and building engineering structures. - Dynamic (forces and displacements), and static analyses - Selection and inspection of sections of steel and/or reinforced cement (RC) structures - Preliminary drawings for steel structures and separate RC elements

Numerous professionals utilize VisualAnalysis (VA) to efficiently meet their project deadlines. Users frequently commend it as "exceptional value" and "incredibly user-friendly." It provides essential tools that are budget-conscious. The software allows for the creation of 3D models for a variety of structures, including complete buildings, tanks, and towers, alongside offering both static and dynamic response analysis capabilities. It performs design code verifications for materials such as steel, wood, concrete, cold-formed steel, and aluminum. VisualAnalysis features comprehensive analysis and design functionalities, including automatic plate meshing, a command window, nonlinear elements, and dynamic time history analysis. Its 3D static and dynamic finite element analysis (FEA) is suitable for civil, mechanical, aerospace, and other types of structural evaluations. Additionally, it includes optional support for building code load combinations. Users can easily apply loads, distribute area loads to structural members, and manage gravity and lateral loads within the same project. The software enables the creation of frame, truss, or FEA models for nearly any type of structure, with the ability to sketch, generate, and import designs from CAD or BIM tools like Revit. With its rapid static analysis, P-delta calculations, AISC Direct methods, dynamic assessments, and nonlinear capabilities, it delivers proven and validated results for engineering professionals. Overall, VisualAnalysis stands out as a versatile solution for various engineering needs.

ideCAD One AEC is a multidisciplinary BIM software for Architecture, Structural Engineering and Detailing. It also includes Building Information Modeling (BIM). The Integrated Package offers Structural Engineers and Detailers Integrated BIM, AEC and CAD Tools that support projects at all stages of design and construction. Integrated design tools help you create high-quality, high performance Architectural and structural designs. Optimise projects with integrated Structural Analysis, Steel Design, Concrete Design, Connection Design, visualization and simulation tools. Improve predictability on the field by using integrated tools that maximize constructability. Integrated workflows for integrated modeling, multi-discipline coordination and construction documentation can accelerate design processes and improve the quality of designs.

Advance Design serves as a robust and user-friendly FEM Structural Analysis tool specifically tailored for structural engineers working within a BIM ecosystem. It adeptly handles the design of various structures, accommodating different load types while integrating concrete, timber, and steel components seamlessly. With compliance to significant code standards, including Eurocodes and North American guidelines, Advance Design elevates the BIM experience significantly. It fosters intelligent, model-driven workflows that benefit engineers and construction professionals alike. By functioning as a BIM platform, it ensures the preservation of geometric and analytical data throughout the design process via smooth model transfers. Furthermore, analysis outcomes are preserved within the Digital Model and contribute meaningfully to the BIM workflow. For example, these results can facilitate the initiation of rebar designs or steel connection processes directly within Revit, creating innovative opportunities in structural design. With its powerful capabilities, user-friendly interface, and full compatibility with Revit®, Advance Design is backed by a dedicated team of experts and offers a flexible licensing structure to accommodate diverse user needs. This combination of features makes it an essential tool for modern structural engineering.

S-FRAME empowers users to model, analyze, and design any type of structure, accommodating a wide range of geometric complexities, material specifications, loading scenarios, nonlinear behaviors, and design code stipulations. The platform features automated framework generators that facilitate rapid model creation and offers seamless integration with BIM and DXF formats, allowing users to enhance their efficiency with built-in design tools for concrete and steel, which support design, optimization, code adherence, and report generation. Through S-FRAME, users can swiftly define structures with advanced modeling automation, enabling the generation of regular framework structures and both standard and custom trusses, while clone tools allow for the easy replication of entire models or specific sections. Moreover, the ability to import existing BIM and DXF models significantly reduces modeling time, further improving productivity. The sophisticated meshing capabilities of S-FRAME create a detailed finite element mesh, equipping users to derive comprehensive analysis results tailored to their areas of interest. Lastly, users have the flexibility to delve deeper into their analysis by converting members into multi-shell models, enhancing their understanding and evaluation of structural performance.

ProtaStructure offers a cutting-edge structural BIM solution tailored for structural engineers, enabling them to efficiently and precisely model, analyze, and design buildings. By utilizing a centralized model, users can effortlessly compare various design options and automate both steel and concrete designs, significantly cutting down on design time while enhancing project profitability. The platform includes sophisticated features like grouped member design, three-dimensional finite element analysis, staged construction planning, as well as seismic design and punching shear evaluations, allowing for rapid results generation. Adapt to changes seamlessly and foster smooth collaboration with architects, owners, and other stakeholders through intelligent BIM integration. With ProtaStructure, you can not only save valuable time but also maximize project profits, ensuring a streamlined workflow from start to finish. Leveraging its advanced capabilities, ProtaStructure stands out as an essential tool for modern structural engineering projects.

Subjecting your designs to real-world scenarios can significantly enhance product quality while simultaneously minimizing the costs associated with prototyping and physical testing. The SOLIDWORKS® Simulation suite offers a user-friendly collection of structural analysis tools that employ Finite Element Analysis (FEA) to forecast how a product will behave in actual physical conditions by virtually evaluating CAD models. This comprehensive portfolio is equipped with capabilities for both linear and non-linear static and dynamic analyses. With SOLIDWORKS Simulation Professional, you can refine your designs by assessing mechanical resistance, durability, topology, natural frequencies, as well as examining heat transfer and potential buckling issues. Additionally, it facilitates sequential multi-physics simulations to enhance design accuracy. On the other hand, SOLIDWORKS Simulation Premium allows for an in-depth assessment of designs concerning nonlinear and dynamic responses, dynamic loading conditions, and composite materials. This advanced tier also features three specialized studies: Non-Linear Static, Non-Linear Dynamic, and Linear Dynamics, ensuring a thorough evaluation of your engineering projects. By leveraging these powerful tools, engineers can achieve greater design confidence and innovation.

e-Xstream engineering specializes in the development and commercialization of the Digimat software suite, which features advanced multi-scale material modeling technology that accelerates the creation of composite materials and structures. Serving as a fundamental component of the 10xICME Solution, Digimat enables in-depth analyses of materials at the microscopic level and facilitates the creation of micromechanical models that are essential for integrating micro- and macroscopic interactions. The material models provided by Digimat allow for the combination of processing simulations with structural finite element analysis (FEA), paving the way for more accurate predictions by considering how processing conditions affect the final product's performance. Utilizing Digimat as an efficient and predictive tool significantly aids users in the design and manufacturing of cutting-edge composite materials and components, leading to substantial savings in time and costs. Ultimately, this capability empowers engineers to push the boundaries of innovation in composite material applications.

PLAXIS 3D encompasses crucial features necessary for conducting routine deformation and safety assessments related to soil and rock. This all-encompassing software facilitates the design and evaluation of soils, rocks, and their associated structures, enabling straightforward full 3D modeling. Users can efficiently create and adjust construction sequences for excavation projects. Additionally, it supports the calculation of steady-state groundwater flow, taking into account flow-related material parameters, boundary conditions, drainage systems, and wells. The software allows for the incorporation of interfaces and embedded pile elements to accurately simulate interactions between soil and foundation, addressing issues like slipping and gapping. With robust soil models and an extensive array of visualization tools, users can achieve reliable results. To tackle the specific geotechnical issues presented by soil-structure interactions, PLAXIS 3D provides various calculation methods, including plasticity, consolidation, and safety analysis, ensuring comprehensive coverage of user needs. Ultimately, this versatility makes it an indispensable tool for engineers in the field.

Oasys software delivers cutting-edge solutions distinguished by their user-friendly designs and the efficiency with which they empower users to rapidly and economically test their concepts. This software enables engineers to tackle the most intricate design challenges with precision, ensuring adherence to global standards and compatibility with other prominent software packages. Users can access Oasys tools individually or take advantage of cost-effective bundles that group related applications. The suite includes a variety of analysis and design solutions tailored for buildings, bridges, geotechnical projects, and pedestrian traffic management. Oasys provides comprehensive engineering resources for architects, engineers, builders, students, consultants, and planners across multiple disciplines. Whether addressing simple low-rise constructions or sophisticated high-rise and specialized structures facing demanding loading scenarios, Oasys equips users with the necessary tools for thorough analysis and design, ensuring a robust foundation for any project. With Oasys software, professionals can maintain confidence in their results while pushing the boundaries of innovative design solutions.

Enhance the efficiency of initial hull design and evaluate the stability of current vessels more rapidly by utilizing the integrated naval architecture features in MAXSURF. Simplify the process of hull optimization with user-friendly tools that cover aspects such as hull design, stability and strength assessments, resistance and motion forecasts, as well as preliminary structural design and strength evaluations. With MAXSURF's comprehensive suite of naval architecture instruments, visualize and refine vessel designs effectively. Achieve smooth hull forms, adhere to stability standards, reduce power consumption, and guarantee comfort for crew and passengers across diverse sea conditions. Additionally, optimize structural weight while maintaining compliance with scantling requirements through the initial modeling and stress analysis of beams and plate structures. MAXSURF empowers users to elevate design standards for vessels of all sizes. Seamlessly design, analyze, and enhance various types of marine vessels while unleashing your creativity through the swift and convenient modeling of intricate vessels utilizing dynamically trimmed 3D NURB surfaces. Furthermore, this innovative software ensures that you can adapt designs to meet specific regulatory and environmental considerations, enabling more sustainable marine engineering solutions.

SwiftComp is an innovative composite simulation software that combines multiscale and multiphysics capabilities to provide the precision of 3D finite element analysis (FEA) with the simplicity of basic engineering models. This groundbreaking tool simplifies the modeling process for engineers, allowing them to treat composites with the same ease as metals while maintaining accuracy and capturing intricate microstructural details. It offers cohesive modeling for structures that are one-dimensional (like beams), two-dimensional (such as plates or shells), and three-dimensional, effectively calculating the material properties required. Users can utilize SwiftComp independently for virtual composite testing or as an enhancement to existing structural analysis tools, thereby integrating high-fidelity composite modeling into their workflows. Additionally, SwiftComp excels in determining the optimal structural model for macroscopic analysis and includes capabilities for dehomogenization, which enables the calculation of pointwise stresses within the microstructure. It seamlessly connects with established software such as ABAQUS and ANSYS, further broadening its applicability in engineering projects. As a result, SwiftComp significantly enhances the efficiency and effectiveness of composite material modeling in various engineering applications.

SPACE GASS is a versatile 3D analysis and design software tailored for structural engineers. Its broad array of features accommodates everything from beams and trusses to complex structures like buildings, towers, tanks, cable systems, and bridges. Users can benefit from a powerful 64-bit multi-core solver, impressive 3D visualizations, and specialized elements including plate, frame, cable, and tension/compression-only types, as well as tools for moving loads and integrations with various CAD and building management systems. Choosing SPACE GASS means optimizing your resources with cost-effective, safe, and efficient designs. The user-friendly graphical interface allows for immediate visual feedback on changes, enhancing the design process. Additionally, a rapid sparse matrix solver takes full advantage of multi-core processing capabilities for increased efficiency. The software features a diverse suite of structural modeling tools, analysis methodologies, and design modules to meet various engineering needs. Moreover, an array of comprehensive video tutorials is available to guide users through complex tasks effectively. Finally, the software can be configured for either stand-alone use or floating network systems, adding flexibility for different working environments.

Simufact Welding is a versatile product line that delivers extensive capabilities for simulating the elastic-plastic behavior of materials alongside structural welding processes. This software encompasses a variety of welding techniques, enabling users to model and simulate numerous thermal joining methods, including conventional arc and beam welding as well as brazing. Furthermore, it allows for the modeling of heat treatment processes, variations in cooling and unclamping setups, and the mechanical loading of welded structures. It is essential to identify critical distortions related to assembly, bulging, imbalances, and clearances during the simulation process. Users can also explore and enhance clamping tools before making any financial commitments to tool investments. This software aids in determining the most effective welding directions and sequences, ultimately leading to improved welding outcomes and more efficient production processes. Additionally, it supports engineers in refining their designs for optimal performance and reliability.

ProSteel software enables the efficient creation of precise 3D models for structural steel, metal projects, and steel assemblies. It allows users to swiftly generate design drawings, fabrication details, and schedules that automatically update in response to any modifications made to the 3D model. Furthermore, the software provides detailed outputs for CNC machines, streamlining the steel fabrication process. ProSteel is designed to support your construction and planning efforts for structural steel and metal work within a 3D modeling environment. When used alongside AutoCAD or MicroStation, it offers an intuitive and integrated multi-material modeler that is ideal for designing complex structures, producing shop drawings, assembling connections, and managing bills of materials. You can quickly extract 2D drawings that will adjust automatically when the 3D model is altered. Additionally, ProSteel's interoperability with other Bentley and third-party applications facilitates seamless information exchange across different disciplines, improving collaboration and efficiency throughout the project lifecycle. This capability enhances the overall workflow, making it easier to coordinate tasks among various teams involved in the construction process.

ProStructures is an all-encompassing application designed for the design of steel and concrete structures, aimed at enhancing both productivity and profitability in your projects. This powerful tool enables users to build and seamlessly update three-dimensional models that incorporate structural steel and reinforced concrete elements. ProSteel, a key component of this suite, facilitates the modeling and detailing of steel structures catering to various sectors. Users can efficiently generate models and documentation for steel frameworks, ensuring the delivery of precise 3D representations while extracting essential engineering, fabrication, and erection drawings. The application allows for automatic updates whenever modifications are made to the 3D model, ensuring that all information remains current. It also produces detailed drawings for every conceivable steel shape, connection, and plate work directly from the 3D representation. Moreover, it has the capability to generate and refresh in-drawing reports, external documentation, and bills of material. Additionally, users can create comprehensive 3D models alongside design drawings, fabrication specifics, and schedules that automatically reflect any alterations made to the 3D model, streamlining the entire design process further. This integration of features makes ProStructures an invaluable asset for professionals in the field.

STRAP (STRuctural Analysis Program) provides advanced software solutions tailored for structural analysis and design. It encompasses the full spectrum of the design process, extending from initial analysis to the creation of detailed drawings, and offers design engineers flexible options for an extensive variety of concrete and steel structures such as residential and commercial buildings, bridges, industrial facilities, retaining tanks, communication towers, and much more. This software stands out as a comprehensive tool for designing a broad array of structures, ranging from small residential projects to complex high-rise buildings. With its streamlined workflow, STRAP ensures that all necessary requirements for effective project analysis and design are met. It features an intuitive node definition process that allows users to work with either a Cartesian or cylindrical coordinate system, enhancing user experience and efficiency. Ultimately, STRAP is designed to support engineers in delivering top-quality structural solutions across diverse applications.

ProtaSteel empowers structural engineers and detailers to swiftly automate the design of steel connections, generating high-quality steel detail drawings within minutes. By importing models created in ProtaStructure directly into ProtaSteel, users can save countless hours through the automated design of a diverse selection of bolted and welded steel connections tailored to their needs. It offers a 3D visualization tool that facilitates the coordination of models, allows for the addition of auxiliary steelwork, and enables thorough quantification and value engineering of projects. The software dramatically cuts down on both design and detailing time by automatically generating exceptional engineering drawings for all steelwork and connection specifics. Not only does this enhance the productivity of design teams, but it also boosts the profitability of business projects. Additionally, ProtaSteel simplifies project management by ensuring seamless coordination with other prominent BIM platforms such as Tekla Structures and Revit, fostering a more integrated workflow. In this way, engineers can focus more on creative problem-solving and innovation within their projects.

Effortlessly merge design and analysis into a single, streamlined model-based approach. Our user-friendly, integrated software for design and analysis empowers engineers to swiftly produce safe, effective, and optimized designs, regardless of the structural materials used. Experience a transformation in your workflow today! Tekla Structural Designer equips engineers to analyze and design buildings with remarkable efficiency and profitability. With extensive automation and an array of unique features tailored for optimal concrete and steel design, Tekla Structural Designer enables engineering firms to secure more projects and enhance their profit margins. From quickly evaluating various design options to managing changes cost-effectively and fostering seamless collaboration in BIM, Tekla Structural Designer can significantly elevate your business performance. Achieve quicker design cycles and improve your profitability, as the creation of a unified model with a single dataset ensures smooth and effective BIM integration. The impact on your productivity will be evident as you implement this powerful tool.

Home Designer Software stands out as the leading 3D interior design and home remodeling application, built upon the advanced technology of Chief Architect's professional architectural tools, making it accessible for do-it-yourself enthusiasts. Explore the reasons that make Home Designer the premier choice for visualizing and crafting your next home improvement project. Chief Architect is the go-to software for professionals such as architects, builders, remodelers, and interior designers alike. With its intelligent building features, users can effortlessly produce construction drawings, detailed floor plans, elevations, and stunning 3D renderings, including immersive 360-degree views. This software is specifically designed for residential projects, equipped with tools that automatically generate essential elements like roofs, foundations, and framing dimensions. As you design walls, windows, and doors, the application concurrently constructs a 3D representation, which can be conveniently shared with homeowners, structural engineers, or subcontractors via the 3D Viewer app. Such capabilities enhance collaboration and streamline the design process, ensuring that every detail is communicated effectively.

With STAAD, you are empowered to design, assess, and document structural projects globally, utilizing any material you choose. This software provides a versatile solution tailored to meet all your structural engineering requirements from the ground up. STAAD serves as an all-encompassing application for structural finite element analysis and design, enabling users to conduct evaluations on any structure subjected to various loads including static, dynamic, wind, seismic, thermal, and moving forces. Available in multiple variations, STAAD allows you to select the version that best suits your specific needs. Renowned for its analytical capabilities, extensive applications, interoperability, and efficiency, STAAD is a favored choice among structural engineers. It facilitates 3D structural analysis and design for both steel and concrete frameworks. Furthermore, a physical model created within the software can easily be converted into an analytical model for in-depth structural analysis. STAAD incorporates numerous design code standards, ensuring compliance and accuracy in engineering practices. In addition, its user-friendly interface enhances productivity, making complex design processes simpler and more efficient.

Fatigue Essentials is a desktop software designed to streamline the process of structural fatigue analysis. This application offers an intuitive interface for performing stress-life evaluations, utilizing either traditional stress calculations or integrating with FEMAP™ to leverage finite element analysis results. The program is designed with a user-friendly tree structure that guides users through various stages of analysis, starting with selections related to loads, materials, and spectrum branches. Each section allows for different variations of analysis or methods of input. Users can view analysis results directly on the screen, which can be easily copied into reports or visualized as damage contour plots in FEMAP. It encompasses a wide range of engineering needs, featuring a classic mode that allows for manual input of stresses and a professional mode linked with FEMAP, which can read nodal stresses and generate damage contour visualizations. Additionally, users have the flexibility to choose between interactive input or file uploads for entering stresses and cycles, enhancing the application's versatility. Ultimately, Fatigue Essentials stands out as an essential tool for engineers engaged in fatigue analysis.

progeBILLD is an advanced software solution for MEP Building Services design, featuring specialized modules for Electrical, Mechanical/Structural, and HVAC/Piping, as well as the capability to export Bill of Materials data and include manufacturer libraries tailored to each specific industry. The software is designed with user-friendliness in mind, offering an intuitive interface that enables users to start designing right away without the need for extensive training. Among its offerings, progeBILLD Mechanical/Structural stands out as a robust tool for developing mechanical and structural projects, equipped with a variety of libraries filled with standardized components such as steel profiles that adhere to DIN, EN, ISO, and other relevant standards. Additionally, the program streamlines the design process through ready-to-use objects and commands that facilitate the creation of detailed schematics and multi-view drawings. Users will find an extensive collection of industry-standard fasteners, including thousands of bolts, screws, nuts, and pins, making it an indispensable asset for any engineering project. With its comprehensive features and ease of use, progeBILLD is well-suited for professionals looking to enhance their design capabilities.

SolidFEA is a groundbreaking solid finite element analysis tool that aims to make sophisticated structural engineering design both more accessible and cost-effective. Utilizing the Calculix engine, it provides in-depth sub-model analysis while requiring less financial investment and computing power compared to competitors such as Abaqus. This software is particularly well-suited for tackling intricate engineering challenges, such as those found in steel connections and bridge engineering, and it empowers users by making specialized software easier to access. With its ability to import IFC file formats, SolidFEA integrates smoothly into existing engineering workflows, enhancing the functionality of our GenFEA software for thorough structural analysis. By lowering entry barriers traditionally tied to solid finite element analysis (FEA), SolidFEA represents a significant advancement in structural engineering design and encourages innovation by allowing more engineers to participate in complex projects. Ultimately, its user-friendly design and compatibility features facilitate a new era of efficiency in engineering practices.

FrameWorks® Plus serves as an advanced structural modeling and drawing solution, enhancing your entire workflow from drawing and modeling to analysis and reporting. By merging structural tasks with the plant creation process, it adds significant value to your modeling efforts. Its compatibility with third-party analytical and steel detailing software, along with other Hexagon plant design tools, ensures that all elements of the structural engineering workflow are synchronized, keeping your data both accurate and up-to-date. This tool is fully compatible with PDS, allowing you to generate structural models of plants and seamlessly share the latest project information globally through its PDS interface. Furthermore, FrameWorks Plus is intricately woven into the engineering and construction processes, offering more than a mere CAD solution; it features intelligent graphics that facilitate straightforward modeling, analysis, and reporting. This enhanced capability makes FrameWorks Plus a vital asset for teams looking to streamline their structural engineering tasks effectively.

The development of formwork, positioning, and shop drawings encompasses all essential features necessary for structural design, including associative dimensioning, level indicators, hatching, and various symbols. It includes layouts for steel bars and mesh suitable for any reinforcement scenario, ensuring seamless integration with AutoCAD, along with customizable settings to meet office standards through styles. It allows for the direct generation of schedules, supports user-defined shapes, and facilitates the export of existing reinforcements for calculations based on the second-order theory. The system also offers a polygonal mesh layout and macros designed for creating parametric members, with the Macros Module requiring detailing capabilities. Additionally, it provides comprehensive check, production, and layout plans specifically for BAMTEC customized reinforcement carpets. This functionality enables the fully automated generation of reinforcement carpets, includes all necessary drawings consolidated into a single file, allows for the subsequent arrangement of areas, and features extensive editing options for various area specifications, whether by value or by the diameter and number of bars. Moreover, users can easily modify the designs to accommodate specific project needs, ensuring maximum flexibility in their structural planning.

The iStruct® application suite serves as a vital resource for the design, specification, and delivery of structural products within the realms of residential and light commercial construction. These applications work together harmoniously, enabling the sharing of essential features such as product availability, pricing, templates, and customer information, which simplifies the process of achieving uniform outcomes with minimal effort. Created with the intent of fostering interdepartmental collaboration, iStruct® enhances your organization’s productivity while optimizing the design workflow, leading to significant gains in efficiency as well as savings in both time and costs. Additionally, the suite provides comprehensive analysis for both gravity and wind loads affecting all components of the wall, ensuring a thorough evaluation of structural integrity. This multifaceted approach ultimately contributes to more reliable and effective construction projects.

OpenBuildings Designer, previously known as AECOsim Building Designer, is Bentley's comprehensive solution for multi-discipline building information modeling (BIM). It enables users to explore, innovate, and expedite the design and construction of buildings more efficiently than ever before. With the ability to design, analyze, document, and visualize structures of varying sizes and complexities, it enhances communication of design intent while overcoming obstacles between different building disciplines and teams located in different regions. The software empowers users to advance their building information modeling practices, leading to quicker project delivery and increased assurance in aspects such as design integrity, workflow efficiency, and overall productivity. By fostering collaboration among architects, mechanical, electrical, and structural engineers through a unified set of tools and processes, it streamlines project management. Furthermore, users can seamlessly integrate information from various formats and confidently tackle projects of all scales, ensuring that their design intentions are communicated clearly with customizable and dependable deliverables. This comprehensive approach ultimately transforms the building design process, making it more cohesive and effective.

The Akselos Cloud platform offers a comprehensive framework for Digital Twins through a cloud-based solution. It encompasses a full spectrum of services, from automated updates regarding asset loads and conditions to user-friendly dashboards that clearly display current asset integrity. With Akselos technology, there are no longer any constraints, as it allows for the modeling of intricate issues in structures of any scale with remarkable precision. Our innovative approach accelerates structural simulations, achieving speeds up to 1000 times faster than traditional software. Tasks related to design and operational workflows that previously required months of effort can now be completed in just hours. Furthermore, relevant data, including sensors and process parameters, can be seamlessly integrated with our models, enabling even greater optimization of your assets. Each of our simulations rigorously validates results against applicable engineering codes and standards, ensuring that you can trust your asset’s safety and compliance with all necessary regulations. This comprehensive capability not only enhances efficiency but also fosters greater innovation in asset management and maintenance.

ProtaDetails is an innovative system designed to automate the creation and organization of all your structural concrete detail drawings simultaneously. It significantly reduces drafting time by efficiently extracting design specifics from ProtaStructure and arranging them onto your company's drawing sheets with ease. With specialized CAD editing and detailing features that cater specifically to structural engineering, you can enhance your drawing production process. The software enables you to make informed design decisions by providing comprehensive quantities extraction, allowing for value engineering of projects and enhancing the design services you offer to clients. Additionally, it simplifies the management of design alterations by effortlessly updating any project changes from ProtaStructure. ProtaDetails also boasts an expanding library of component macros that facilitate the instant design and detailing of common project elements such as retaining walls, stairs, piles, and foundations. By utilizing ProtaDetails, you can save countless hours of drafting time, accelerate project delivery, and increase both productivity and profitability, ultimately transforming the way you approach structural engineering projects. This comprehensive solution empowers engineers to focus more on innovative design rather than tedious drafting tasks.

The user interface of our software has been designed for maximum ease of use. Users can create geometry in multiple views using sophisticated modeling tools, or they can input data through spreadsheets, all seamlessly integrated within RISA-3D. This powerful tool offers analysis and design capabilities that facilitate the quick creation of various structures, accommodating a diverse selection of materials. You can design everything from buildings and bridges to tanks and culverts, covering a vast array of engineering needs. Detailed reports can be generated, featuring both graphical and numerical results, which provide comprehensive output and instill confidence in your designs for you and your team. The latest iteration of RISA-3D's user interface has been tailored specifically to the workflow of structural engineers. It employs a straightforward left-to-right, tab-by-tab ribbon system that allows users to easily navigate their models from initial concepts to final design refinement by simply following the sequence of icons. Moreover, the interface offers customization options, enabling users to keep their most frequently used tools readily accessible at all times, enhancing their efficiency even further. Ultimately, this thoughtful design ensures that engineers can focus more on innovation and less on navigating complex software.

Simcenter Nastran stands out as a leading finite element method (FEM) solver known for its exceptional computational performance, precision, dependability, and scalability. This comprehensive tool provides robust solutions for various applications, including linear and nonlinear structural analysis, structural dynamics, acoustics, rotor dynamics, aeroelasticity, thermal analysis, and optimization. One of the key benefits of having such a diverse array of solutions within a single solver is that it standardizes input/output file formats across all types of analyses, significantly streamlining the modeling process. Whether utilized as an independent enterprise solver or integrated within Simcenter 3D, Simcenter Nastran is instrumental for manufacturers and engineering firms across several sectors, including aerospace, automotive, electronics, heavy machinery, and medical devices. By catering to their vital engineering computing requirements, it enables these industries to deliver safe, reliable, and optimized designs while adhering to increasingly tighter design timelines. This versatility and efficiency make Simcenter Nastran an invaluable asset in the modern engineering landscape.

The FEA program RFEM enables quick and easy modeling, structural, and dynamic calculation as well as the design and construction of models with member and plate, wall, folded plates, shell, shell, and other solid elements. Modular software allows you to connect the main program RFEM to the appropriate add-ons to meet your specific requirements. Structural analysis program RFEM offers structural engineers a 3D FEA tool that meets all modern civil engineering requirements. Simple and complex structures can be modelled with ease thanks to efficient data input and intuitive handling. The basis of a modular software program is the structural analysis program RFEM. The RFEM basic program is used to create structures, materials, loads, and plans for spatial and planar structural systems that include plates, walls, shells and members. You can also create mixed structures and model contact elements.